call now 01785 254 597

TM2

High Speed Mixer with 6" Propeller

high speed mixer with 6 inch propellor 415 volt three phase motor model TM2

TM2 High Speed Industrial Mixer fitted with a 6 inch Ø marine style propeller with a 0.55kW 415 Volt 3 Phase Motor.


TM2 High Speed Mixer Introduction

The TM2 is a high speed industrial mixer, designed for mixing and blending applications in process control, water treatment or effluent treatment applications, such as pH correction and powder mixing.

Fitted with a 6 inch or 150mm marine style propeller, the TM2 creates a vortex within a liquid solution forcing the powders or liquids to mix. The TM2 operates at 960 RPM and is powered from a 0.55kW 3 phase 415 VAC motor.

The direct drive mixer is suitable for mounting into vessels with an approximate capacity of 1250 litres such as our 1250 Litre Chemical Storage Tank or other similar vessels.


High Speed Mixer with 6 inch Propeller

The TM2 utilises a 6 inch propeller which forces the liquid into a vortex to provide continual mixing of liquids or powders. The marine style propeller has a 3 petal arrangement and a tip continuous diameter of 6 inches.  It is manufactured in 316 stainless steel.

The 6 inch propeller is held in place with a shaft and coupling arrangement also manufactured in 316 stainless steel.  The shaft is available custom manufactured to length.

Our 6 inch propeller is designed to optimise the mixing capability by maximising the motor efficiency.  The effective mixing of the propeller is greater per horse power when compared with flat disc type mixers and other styles of propeller.


High Speed Mixer TM2 with 0.55kW 3 Phase Mixer

The standard TM2 is fitted with TEFC (Totally Enclosed Fan Cooled) direct drive motor and manufactured to IP55 specifications. The standard motor is a 415 V three phase motor. We also offer a 380 Volt motor, flame proof motor and we can offer a comparable air mixer for specific applications.


Chemically Resistant High Speed Mixer TM2

For use with process chemicals, we offer the TM2 with the wetted parts (shaft and 6 inch propeller) coated in PVC.  This makes the mixer suitable for mixing applications where the process chemical reacts with 316 stainless steel.

As the shaft and mixer are coated as a single piece, this ensures that any fastenings are resistant to the reagents being used in the process.

We strongly recommend when considering a chemically resistant high speed mixer, that the materials being used are compatible with PVC.


High Speed Mixer with Two Propellers TM2

With a large shaft diameter, the TM2 is suitable for use with tanks where the dimensions are non-standard such as chemical storage vessels or where the depth is proportionally larger than the width.

With some applications it can be beneficial to incorporate a second propeller to aid with the liquid vortex formation helping in pushing the mixed liquids, or powder and liquid mix, into convergence.

When specifying a mixer with a second propeller we will request additional information about the application to ensure the motor power rating is suitable for the application. This is because the addition of a second propellor to the mixer will offer a significant increase on the load.


TM2 High Speed Mixer Features & Benefits

The TM2 is a high speed mixer designed for continuous mixing in industrial environments.  Manufactured in house at our Stafford facility, the TM2 is available with a number of customisations, depending upon the duty required.  These options include a second propeller, a 3 phase 380 VAC motor, flame proof motor, or with a chemically resistant coating. Please get in touch if you require any specific customisations for use with your process.

The 6 inch propeller offers efficient mixing and is designed for vessels approximately 1250 Litres in capacity.  For vessels with variable liquid levels the TM2 can be integrated with our Liquid Level Control devices, to prevent operation where a low liquid level is present.

As a direct drive high speed mixer with totally enclosed fan cooled motor, the TM2 is designed for continuous operation with minimal preventive maintenance and to offer efficient mixing of water treatment, effluent treatment, and process control applications.

TM2 High Speed Mixer Specifications

  • Specifications

    Specifications

    High Speed Industrial Mixer 960 RPM

    Model Number:- TM2

    Frame Size:- D80

    Voltage:- 3 Phase 415 VAC

    Power:- 0.55kW or 0.75 HP

    Speed:- 960 RPM

    Flange Diameter:- 200mm

    Hole Diameter:- 4 x 12mm

    PCD:- 165mm

    Plate Hole:- 132mm

    Propellor Diameter:- 150mm / 6 Inch

    Propellor Type:- 3 Blade Marine Style

    Suitable Volume:- 1250 Litres

    Materials Of Construction:- 316 Stainless Steel (Optional PVC Coating)

  • Ordering Information

    Model NumberShaft LengthShaft / Propellor MaterialMotorPropellors
    TM2-XX XX = shaft length in mm 316 Stainless Steel 0.55kW, 3 Phase, 415 Volt AC 1 x 6 inch
    TM2-XX-EVA XX = shaft length in mm Plastic Coated 316 Stainless Steel 0.55kW, 3 Phase, 415 Volt AC 1 x 6 inch
    TM2-XX-2 XX = shaft length in mm 316 Stainless Steel 0.55kW, 3 Phase, 415 Volt AC 2 x 6 inch
    TM2-XX-2-EVA XX = shaft length in mm Plastic Coated 316 Stainless Steel 0.55kW, 3 Phase, 415 Volt AC 2 x 6 inch

    PTFE coating is also available for use with concentrated chemical reagents - please speak with our friendly sales team for more information.

    For high speed mixers with multiple propellors please get in touch with our friendly sales team so we can discuss propellor spacing.

 

Related Items Industrial Mixers High Speed

More Information

Search