call now 01785 254 597


240 VAC High Speed Mixer with 3" Propeller

high speed mixer 3 inch propellor 240 volt single phase motor TM0 SP2

TM0-SP2 High Speed Industrial Mixer, fitted with a 3 inch Ø marine style propeller with a 0.18kW 240 Volt single phase motor.

TM0-SP2 High Speed Mixer Introduction

The TM0-SP2 is a high speed industrial mixer designed for mixing and blending applications in process control; water treatment or effluent treatment applications, such as pH correction and powder mixing, where a 3 phase supply is not available.

Fitted with a 3 inch or 75mm marine style propeller, the TM0-SP2 creates a vortex within a liquid solution forcing the powders or liquids to mix. The TM0-SP2 operates at 1400 RPM and is powered from a 0.18kW single phase 240 Volt AC motor.

The direct drive mixer is suitable for mounting into vessels with a 200 Litre capacity such as our 200 Litre dosing tank or other similar vessels.

High Speed Mixer with 3 inch Propeller

The TM0-SP2 utilises a 3 inch propeller which forces the liquid into a vortex to provide continual mixing of liquids or powders. The marine style propeller has a 3 petal arrangement, creating a continuous spinning tip diameter of 3 inches which is manufactured in 316 stainless steel.

The 3 inch propeller is held in place with a shaft and coupling arrangement, also manufactured in 316 stainless steel.  The shaft is available custom manufactured to length.

Our 3 inch propeller is designed to optimise the mixing capability by maximising the motor efficiency.  The effective mixing of the propeller is greater per horse power when compared with flat disc type mixers and other styles of propeller.

High Speed Mixer TM0-SP2 with 0.18kW 3 Phase Mixer

The standard TM0-SP2 is fitted with a TEFC (Totally Enclosed Fan Cooled) direct drive motor , manufactured to IP55 specifications.  The standard motor is a 240 V single phase motor.  We also offer a 380 Volt motor; flameproof motor and on the standard TM0 model we offer a 415 VAC 3 phase motor.

Chemically Resistant High Speed Mixer TM0-SP2

For use with process chemicals, we offer the TM0-SP2 with the wetted parts (shaft and 3 inch propeller), coated in PVC.  This makes the mixer suitable for mixing applications where the chemical in the process reacts with 316 Stainless Steel.

The shaft and mixer are coated as a single piece to ensure that any fastenings are resistant to the reagents being used in the process.

We strongly recommend when considering a chemically resistant high speed mixer that the materials being used are compatible with PVC. 

TM0-SP2 High Speed Mixer Features & Benefits

The TM0-SP2 is a high speed mixer, designed for light to medium industrial duties, where a 3 phase supply is not present.  Manufactured in house at our Stafford facility, the TM0-SP2 is available with a number of customisations, depending upon the duty required.  It is suitable for Food Grade lubricant requirements with a 415 VAC 3 phase motor, 3 phase 380 VAC motor, flameproof motor, or with a chemically resistant coating.  Please get in touch if you require any specific customisations for use with your process.

The 3 inch propeller offers efficient mixing and is designed for vessels approximately 200 Litres in capacity. For vessels with variable levels, the TM0-SP2 can be integrated with our Liquid Level Control devices to prevent operation where a low level is present.

As a direct drive high speed mixer, with a totally enclosed fan cooled motor, the TM0-SP2 is designed for continuous operation with minimal preventive maintenance for the efficient mixing of water treatment, effluent treatment, and process control applications.

TM0-SP2 High Speed Mixer Specifications

  • Specifications


    High Speed Industrial Mixer 1400 RPM

    Model Number:- TM0-SP2

    Frame Size:- D71

    Voltage:- Single Phase 240 V AC.

    Power:- 0.18kW or 0.5 HP

    Speed:- 1400 RPM

    Flange Diameter:- 160mm

    Hole Diameter:- 4 x 10mm

    PCD:- 130mm

    Plate Hole:- 112mm

    Propellor Diameter:- 75mm / 3 Inch

    Propellor Type:- 3 Blade Marine Style

    Suitable Volume:- 200 Litres

    Materials Of Construction:- 316 Stainless Steel (Optional PVC Coating)

  • Ordering Information

    Model NumberShaft LengthShaft / Propellor MaterialMotorPropellors
    TM0-XX XX = shaft length in mm 316 Stainless Steel 0.18kW 3 Phase 415 Volt AC  1 x 3 inch
    TM0-XX-EVA XX = shaft length in mm Plastic Coated 316 Stainless Steel 0.18kW 3 Phase 415 Volt AC  1 x 3 inch
    TM0-SP2-XX XX = shaft length in mm 316 Stainless Steel 0.18kW Single Phase 240 Volt AC 1 x 3 inch
    TM0-SP2-XX-EVA XX = shaft length in mm Plastic Coated 316 Stainless Steel 0.18kW Single Phase 240 Volt AC 1 x 3 inch

    PTFE coating is also available for use with concentrated chemical reagents - please speak with our friendly sales team for more information.


More Information

Related Items Industrial Mixers Small