BT100

100 Litre Bund Tank (110L Capacity)

100 litre bund tank model BT100 with 110 Litre Capacity

100 Litre Bund Tank manufactured in MDPE with 110 Litre capacity


100 Litre Bund Tank BT100 Introduction

The BT100 is a Bund Tank for use with our 100 Litre Dosing Tank and can hold 110% of the capacity of the rated dosing tank, giving it a capacity of 110 litres.

The 100 Litre Bund Tank model BT100 has dimensions of 806 Ø x 325 H (mm) and is designed specifically for use in the water treatment, effluent treatment or process applications.

Manufactured in the UK using a single piece moulding, the BT100 is constructed from U.V. Stabilised MDPE (Medium Density PolyEthylene).

The BT100 provides a simple and cost effective way of providing spill containment to a 100 Litre Dosing Tank, ensuring compliance with current Health and Safety guidelines, enabling at least 110 litres of containment in the event that the chemical dosing tank has become compromised.


Stackable 100 Litre Bund Tank

For ease of storage requirements, the BT100 is manufactured with a tapered design to allow a number of bund tanks to be stacked together.

The folded over top of the bund tank is designed with fingers in mind, ensuring that a stack of bund tanks can be easily separated without jamming, and being as easy on the fingers as possible.

The single piece construction and rolled over edge also increases the mechanical strength of the bund tank, ensuring it remains rigid, even when full.


Bund Tank Equipment Mounting

The BT100 is a relatively small chemical bund tank, designed for use with a chemical container with a capacity of 100 litres. When pairing the bund tank with a dosing tank fitted with a flooded suction kit, or foot mounted inlets / outlets, we recommend ensuring that there is enough space for all the mounted equipment.  If space is limited, we recommend using the bund tank which is one size larger.  In this instance the 200 Litre Bund Tank BT200.


Dosing Tank for BT100

The BT100 is the companion bund for the DT100 Dosing Tank which is designed to stand inside the bund tank, allowing the top of the tank to be easily accessed. The BT100 bund tank has a capacity of > 110 litres in total which is designed to offer compliance with Health & Safety legislation, and to provide containment in the event of the tank becoming compromised.


100 Litre Bund Tank Features & Benefits

The 100 Litre Bund Tank model BT100 is manufactured in the UK using moulding techniques to give single piece construction, with no welds or seams, ensuring greater mechanical strength.

Designed specifically to provide spill containment to the DT100 Dosing Tank with 110% of the DT100's capacity, the BT100 can contain at least 110 Litres to satisfy current Health & Safety guidelines.

The BT100 is manufactured in chemically resistant MDPE to ensure compatibility with a wide range of chemical reagents. Please don't hesitate to get in touch, if you wish to check the complicity of your reagents with MDPE.

In addition to the chemically resistant properties, the MDPE is also supplied to food grade standards and is U.V. stabilised to ensure no discolouration to the tank, even when stored outside.

BT100 Specifications

  • Specifications

    Specifications

    100 Litre Bund Tank

    Model No:- BT100

    Capacity:- Greater than 110 Litres

    Max. Operating Temperature:- 40°C

    Materials:- MDPE (Medium Density PolyEthylene)

    Standard Colours:- (U.V Stabilised) Natural

    Accuracy:- ±2% of stated sizes.

    Dimensions:- 806 Dia. x 325 H (mm)

  • Features

    Features

    • Designed to provide spill containment for 100 litre dosing tank DT100 offering 110% of the DT100's capacity. 
    • Manufactured in the UK using a one piece rotatory moulding process - with no seams or welds.
    • Designed to satisfy current health & safety legislation.
    • Designed specifically for use in water treatment, effluent treatment and process control applications. 
    • U.V stabilised MDPE to food grade standards.  
  • Data Sheets

    Data Sheets

Request Product Info
How your information will be used.

Using the details that you have provided, we will contact you specifically about the product or service that you have requested information on.

We will ask you if you would like to subscribe to our email newsletters which includes The Watermark and if you wish to receive a copy of our catalogue. You are under no obligation to do so and it won't affect us contacting you about a specific product or service if you choose not too.

If you do wish to subscribe to our email newsletter you can opt out at any point and the our full data policy can be found here.

 

More Information

Search