call now 01785 254 597

Conductivity Transmitter with a 4-20mA output

 

Conductivity Transmitter Range

A Conductivity transmitter is designed to accurately measure the conductivity of the measured solution and then transmitter a 4-20mA signal to a receiving device. This is normally either a data logger (or online data logger), a PLC or a remote controller such as our BC7635.

The Conductivity transmitter is normally located within close proximity to the solution being measured to allow the operator to calibrate the instrument near where the measurement is taking place and to ensure a local indication of the current conductivity value.

The Conductivity value can then be transmitted up to 1000m away from the Conductivity Transmitter using the same two wires that power the device. The supply voltage is normally provided from the connected instrument although alternative options are available. The transmitted 4-20mA signal corresponds to the measuring range of the Conductivity Transmitter.

Integrated Conductivity Transmitters

An alternative to a Conductivity Cell and Conductivity Transmitter in combination is to use a Toroidal or Inductive Conductivity Transmitter. These work by measuring the fluctuation in the electromagnetic field to derive the Conductivity Value in milliSiemens (mS) which are then transmitted over the 4-20mA range.

While this type of transmitter doesn't include a localised display of the conductivity value, they only require infrequent calibration and the integrated electronics ensure that the all the required components are kept together in a single housing.

Conductivity Transmitter Range


C3630 4-20mA Conductivity Transmitter

C3630 4-20mA Conductivity Transmitter

A Conductivity Transmitter is a device designed to transmit a 4-20mA current signal proportional to the measured Conductivity value over a distance.

The C3630 is available in din-rail mounting or surface mounting configuration across the following rangess:-

  • 0 - 200µS
  • 0 - 2000µS
  • 0 - 20mS

As a loop powered device the instrument uses the same 2 cables that transmit the signal to power the device, and uses automatic temperature compensation to ensure precision conductivity values.

View Product


C3436 4-20mA Conductivity Transmitter

C3436 4-20mA Conductivity Transmitter

The C3436 Conductivtiy Transmitter is our new loop powered device designed to transmit a 4-20mA signal directly proportional to the conductivity value.

The C3436 Conductivity Transmitter has user-selectable ranges across the following measurement ranges:-

  • 0 - 20µS
  • 0 - 200µS
  • 0 - 2000µS
  • 0 - 20mS
  • 0 - 200mS
The C3436 is also able to work with a range of cell constants.

The new microprocessor based conductivity transmitter has full automatic temperature compensation and is available in din-rail mounting or surface mounting configurations

View Product


BCT10 - Toroidal Conductivity Cell with built in 4-20mA for 0-10mS

BCT10 - Toroidal Conductivity Cell with built in 4-20mA for 0-10mS

The BCT10 is an inductive or toriodal conductivity transmitter, which boasts non-fouling operation and integrated electronics to provide a 4-20mA signal.

The BCT10 is a non fouling blind electrodeless transmitter manufactured in cPVC and provides a 2 wire output carrying the isolated 4-20mA current signal.

The BCT10 provides a 4-20mA output signal, fully isolated and temperature compensated across the 0 - 10mS range

View Product


BCT100 - Toroidal Conductivity Cell with built in 4-20mA for 0-100mS

BCT100 - Toroidal Conductivity Cell with built in 4-20mA for 0-100mS

The BCT100 is an inductive or toriodal conductivity transmitter, which boasts non-fouling operation and integrated electronics to provide a 4-20mA signal.

The BCT100 is a non fouling blind electrodeless transmitter manufactured in cPVC and provides a 2 wire output carrying the isolated 4-20mA current signal.

The BCT100 provides a 4-20mA output signal, fully isolated and temperature compensated across the 0 - 100mS range

View Product


BCT1000 - Toroidal Conductivity Cell with built in 4-20mA for 0-1000mS

BCT1000 - Toroidal Conductivity Cell with built in 4-20mA for 0-1000mS

The BCT1000 is an inductive or toriodal conductivity transmitter, which boasts non-fouling operation and integrated electronics to provide a 4-20mA signal.

The BCT1000 is a non fouling blind electrodeless transmitter manufactured in cPVC and provides a 2 wire output carrying the isolated 4-20mA current signal.

The BCT1000 provides a 4-20mA output signal, fully isolated and temperature compensated across the 0 - 1000mS range

View Product

 

Search