Geared Mixer with 20" Impeller & 2.2kW, 415 VAC Motor
GMW4 is a geared mixer with a 20" Impeller, driven from a worm gearbox with a 415v 2.2kW motor.
GMW4 Geared Mixer Introduction
The GMW4 is an industrial geared mixer with a 20 inch impeller and 2.2kW motor, designed as a geared mixer for continuous operation in many liquid mixing applications. These include viscous solutions, and other slow speed stirring and agitation applications within the process control, water treatment and effluent treatment sectors.
The GMW4 has been used for the makeup of pH neutralisation and effluent treatment chemicals, and in process applications where the solution has a high viscosity.
The GMW4 is fitted as standard with a 3 phase 415V 2.2kW AC motor. We don't offer a single phase version of the GMW4. If you have an application where the only available power is from a 110V, 240V supply or where compressed air is available, then please don't hesitate to get in touch, as we may be able to offer alternative solutions.
The standard impeller has a low shear co-efficient making is suitable for flocculent mixing as well as other applications, and is driven with a speed of 70RPM. Other output speeds are available, making it ideal for use on a range of Dosing Tanks, depending upon the duty, liquid type and viscosity.
GMW4 Geared Mixer with 20 inch Impellers
The standard GMW4 utilises a single 20 inch impeller which is used to create a continuous stirring motion within the tank or vessel. This ensures that the solution is under constant agitation from the industrial stirrer making it ideal for keeping lime solutions in suspension as well as other slow speed stirrer applications. It is ideal for improving the contact time and reaction potential when used for the agitation of reagent, mixing polymers or the make-up of effluent treatment chemicals.
The 20 inch impeller is not tapered to ensure the industrial stirrer generates a large contact area to provide both a better contact area for more efficient stirring and a reduced shearing coefficient when used as a flocculant mixer.
In addition to fitting a single 20" impeller, the GMW4 is designed to be fitted with additional impellers, depending upon the nature of the vessel and liquid under agitation. If there is a larger volume of liquid or a large vessel is used with the mixer then we offer the GMW41 with a 2.2kW motor as an alternative.
GMW4 Worm Gearbox Mixer
The 20 inch impellers are directly driven by the worm gear box. The shaft is machined at our production facility in the Stafford, UK, to ensure that it is held securely in place within the worm gearbox itself, without a coupling. This enables us to offer a wide variety of reduction ratios including 70RPM and 140RPM versions.
In addition to offering a number of gearbox ratio options, we machine the shafts and impellers in-house, allowing the shaft length to be manufactured to specification.
Our 3 blade flat 20 inch impeller is designed to optimise the stirring capability of the mixer for a number of different applications, thus making the GMW4 suitable for use as a geared mixer for viscous solutions as well as for flocculent or polymer makeup.
Geared Mixer GMW4 with 2.2kW 3 Phase Motor
The standard GMW4 is fitted with a TEFC (Totally Enclosed Fan Cooled) motor and manufactured to IP55 specifications. The standard motor is a 415 V three phase 2.2kW AC motor. We also offer a 380 Volt motor and flameproof motors.
GMW4 Chemically Resistant Geared Mixer
For use with process chemicals, we offer the GMW4 with wetted parts (shaft and 500mm impeller or impellers) coated in PVC. This makes the mixer suitable for mixing applications, where the process chemical reacts with 316 stainless steel.
The shaft and 20" impeller are coated as a single piece to ensure that any fastenings are resistant to the reagents being used in the process.
Any additional impellers are also coated with PVC to ensure that during the process, the whole wet end of the geared mixer offers greater chemical resistance.
We strongly recommend when considering a chemically resistant high speed mixer that the materials being used are compatible with PVC.
GMW4 Geared Mixer Features & Benefits
The GMW4 is a geared mixer, suitable for a wide variety of applications and unlike our High Speed Industrial Mixers, it doesn't have to be contained within a tank where the height of the liquid covers the impeller.
Designed for industrial duties, the GMW4 has been used as an industrial stirrer for viscous solutions as well as for other process applications. The GMW4 is commonly fitted with additional impellers to ensure that an even agitation can be achieved with highly viscous solutions, or where the vessel is large or unusually shaped. It is ideal with a single impeller for flocculant make-up as well as a geared mixer for pH neutralisation or other process control applications.
Manufactured in house at our Stafford facility, the GMW4 is available with a number of customised options, depending upon the duty required. These include supplying the slow speed mixer with food grade lubricant, additional impellers, a 3 phase 380 VAC motor, flameproof motor, or with a chemically resistant coating.
The GMW4 can be fitted with a second impeller, although for heavier duties we offer our GMW41 geared mixers.
The 20 inch impeller offers efficient mixing and is designed for large sized vessels in a manner of different environments. It is suitable for use on viscous solutions, depending upon the solution viscosity and volume. If you're unsure on the precise mixer to suit your application, please don't hesitate to get in touch.
The slow speed geared mixer GMW4 is of proven design and construction, requiring minimal preventive maintenance for efficient low shear mixing. It is suitable for a wide range of applications including mixing water treatment chemicals and for mixing in process applications.
GMW4 Geared Mixer Specifications
Geared Industrial Mixer with 20" impeller and 2.2kW motor
Model Number:- GMW4
Voltage:- 3 Phase 415 VAC
Power:- 2.2kW or 2.95 HP
Speed (standard):- 140 RPM
Flange Diameter:- 250mm
Hole Diameter:- 4 x 14mm
Plate Hole:- 182mm
Propellor Diameter:- 500mm / 20 Inch
Propellor Type:- Flat Bladed Impeller
Materials Of Construction:- 316 stainless steel (Optional PVC Coating)
Model Number Motor Shaft Length Impeller Speed Wetted Parts Impellers GMW4-XX-70 2.2kW, 415 Volt AC XX = shaft length in mm 70 RPM 316 Stainless Steel 1 x 20 inch GMW4-XX-140 2.2kW, 415 Volt AC XX = shaft length in mm 140 RPM 316 Stainless Steel 1 x 20 inch GMW4-XX-70-EVA 2.2kW, 415 Volt AC XX = shaft length in mm 70 RPM Plastic Coated 316 SS 1 x 20 inch GMW4-XX-140-EVA 2.2kW, 415 Volt AC XX = shaft length in mm 140 RPM Plastic Coated 316 SS 1 x 20 inch
PTFE coating is also available for use with concentrated chemical reagents - please speak with our friendly sales team for more information.