TPP-1

Temperature Pocket (Thermowell) with Process Fitting

Temperature pocket with process fitting for use with 6mm diameter temperature sensor

316 Stainless Steel temperature pocket (Thermowell) for use with an insertion temperature sensor with process fitting and a stem diameter of 6mm Ø. 


Temperature Pocket TPP-1 Introduction

The temperature pocket model TPP-1 is a 316 stainless steel temperature pocket, designed to accommodate an insertion temperature sensor with process fitting, measuring 6mm in diameter.

Manufactured in all-welded stainless steel to Food Grade standards, the TPP-1 temperature pocket has a 3/4" BSP process thread, allowing it to be screwed into a socket and held in place.  A temperature sensor with a 6mm Ø and a 1/2" BSP process fitting can then be screwed into the temperature pocket and secured in place.

The TPP-1 temperature pocket is designed specifically for temperature sensors with a process fitting such as the TPA-1-N, TPA-1-A and the TPA-3 which are manufactured with a process fitting.


Temperature Pocket TPP-1 Installation

The TPP-1 temperature pocket is designed to be screwed into a process which can either be an inline or pipework installation, or alternatively into a welded boss on a tank or other process vessel.

The standard fitting is a 3/4" BSP male thread.  We can offer alternative sizes if required.

The insertion length of the TPP-1 is 150mm and can be manufactured shorter / longer, as required.

The temperature pocket is designed to accommodate a temperature sensor with a 6mm Ø stem and a male process fitting with a 1/2" BSP thread.  The temperature sensor simply slides into the TPP-1 assembly, then screws into the female socket so that it can be held into place.

It's important to ensure that the length of the temperature sensor is suitable for the length of the TPP-1 temperature pocket, by ensuring the insertion length is the same or slightly shorter.

When installing the temperature pocket into a process we recommend that the minimum and maximum temperatures of the process are between - 50°C and + 250°C which is inline with the maximum and minimum temperature ratings for our temperature sensors.


Temperature Pocket TPP-1 Features & Benefits

Using a temperature pocket on a process is a great advantage for temperature measurement in industrial processes. The threaded boss is designed to accept a 3/4" BSP threaded connection and can often be specified when commissioning tanks or pipework, or installed into existing equipment during scheduled or period shut down.  With a threaded boss in place, a temperature pocket can be permanently installed and the temperature sensor can be easily removed for periodic maintenance, commissioning or calibration, without having to stop the process.

With the TPP-1, the compression fitting is designed to hold a PT100 or PT1000 BS1904 standard temperature sensor, ensuring the process solutions temperature can be precisely monitored or controlled.

Manufactured in 316 stainless steel, the TPP-1 temperature pocket offers both excellent thermal conductivity properties and the all-welded construction makes it suitable for Food Grade applications.

With a compression fitting securing the temperature sensor in place, the insertion length of the sensor can be manually adjusted to ensure that the sensor is placed at the tip of the temperature pocket.

TPP-1 Specifications

  • Specifications

    Specifications

    Temperature Pocket in stainless steel with process fitting

    Model No:- TPP-1

    Range:- -50°C to + 250°C

    Installation:- 3/4" BSP Male process fitting

    Mounting:- 1/2" BSP female fitting for 6mm Ø temperature sensor

    Material:- 316 Stainless Steel all welded construction to food grade standards

    Sensor Type:- Suitable for 6mm Ø Temperature sensor with process fitting only

    Insertion Length:- Standard 150mm

  • Ordering Information

    Model NumberInsertion LengthProcess FittingInstrument Fitting
    TPP-1-XX-PF050-IF025 XX = length in mm 1/2" BSP Male 1/4" BSP Female
    TPP-1-XX-PF075-IF050 XX = length in mm 3/4" BSP Male 1/2" BSP Female
    TPP-1-XX-PF100-IF075 XX = length in mm 1" BSP Male 3/4" BSP Female

    Please note the TPP thermowell / temperature pocket is only suitable for temperature sensors with a process connection - such as the TPA-1-N, TPA-1-A or the TPA-3.

Request Product Info
How your information will be used.

Using the details that you have provided, we will contact you specifically about the product or service that you have requested information on.

We will ask you if you would like to subscribe to our email newsletters which includes The Watermark and if you wish to receive a copy of our catalogue. You are under no obligation to do so and it won't affect us contacting you about a specific product or service if you choose not too.

If you do wish to subscribe to our email newsletter you can opt out at any point and the our full data policy can be found here.

 

More Information

Search