call now 01785 254 597


High Temperature Dip Conductivity Probe With K=10.0

high temperature dip conductivity cell D1-100

The high temperature Dip conductivity cell D1-100 is designed for the continuous measurement of electrolytic conductivity within tanks, sumps, pits, lagoons and other vessels.

High Temperature Conductivity Cell D1-100 Introduction

The D1-100 conductivity cells are precision manufactured to offer high linearity cells offering very accurate cell constants. The conductivity cells comprise of 3 precision machined graphite electrodes mounted within an epoxy body.

The conductivity cells are constructed from PVDF (Kynar), and epoxy resin with carbon electrodes. They are mounted within a riser tube manufactured in cPVC, PVDF (Kynar) or Stainless Steel for greater chemical and thermal resistance. The riser tube is supplied as standard measuring 600mm in length, and can be manufactured up to a length of 2 metres.

The available operating temperatures are as follows:-

  • Manufactured in cPVC is suitable for a temperature of up to 85ºC.
  • Manufactured in PVDF or 316 Stainless  Steel is suitable for a temperature of 100°C.

The D1-100 has a cell constant of K=10.0 which is designed to give greater accuracy when measuring higher conductivities, up to a range of 0 - 1000mS.

The D1-100 is normally held into the process using retaining clips.  There is an optional mounting flange available, in either PVC (as pictured) or PolyPropylene.

The D1-100 conductivity cell has a detachable connector fitted to the cell head for easy servicing and calibration as standard.  We can also offer fitted cell heads for laboratory or portable instruments.

When fitted with a removable head connector this has easy to access connections for a two wire device for conductivity only or a 4 wire device for conductivity with temperature compensation.

We strongly recommend pairing a 2 wire device with our specifically shielded conductivity connecting cable LMK2 and a 4 wire device with our conductivity connecting cable with ATC model LMK4.

D1-100 Automatic Temperature Compensation

The high temperature conductivity dip cell D1-100 is available with automatic temperature compensation to suit a number of different conductivity controllers or conductivity transmitters. Please specify when ordering the name and manufacturer of the conductivity instrument so we can ensure compatibility with the automatic temperature compensation.

D1-100 Dip Conductivity Cell Features & Benefits

The D1-100 is supplied as a complete unit, made to any length from 300mm to 2000mm; ready for simple and permanent installation into a process vessel, either clipped into place or using an optional supplied mounting flange.

With a high linearity conductivity cell the D1-100 can accurately measure higher conductivities with exceptionally accuracy.  Where a high temperature riser tube is fitted, the D1-100 is suitable for use at temperatures up to 100ºC.

Easy to use with minimal maintenance required, the D1-100 is suitable for conductivity applications where a higher range of conductivty is present.  With the automatic temperature compensation, even hot processes can be accurately monitored and controlled.

The D1-100 is often found used in the control of alkali degreasing applications, industrial solution strength control applications, and the control of CIP solutions in the food & beverage industries.

As a reliable and accurate conductivity cell, the D1-100 is a often paired with our C7635 conductivity controller.

D1-100 Conductivity Dip Cell Specifications

  • Specifications


    High Temperature Dip Conductivity Cell

    Model No:- D1-100

    Cell Constant:- K=10.0

    Measuring Range:- 0 - 1000mS

    Length:- 600mm as standard, up to 2000mm available.

    Materials of construction Cell Carbon Graphite, Epoxy, PVDF (Kynar)

    Materials of construction Riser cPVC, PVDF (Kynar) or 316 SS

    Max temperature cPVC:- 0 - 85°C

    Max temperature PVDF or 316 SS:- 0-100°C

    Temperature Compensation:- Available

    Connections:- Fixed Connections or de-mountable Connector

  • Features


    • High Temperature Dip Conductivity Cell for mounting into vented tanks, pits, lagoons or other process vessels.
    • Optional automatic temperature compensation for use with a wide variety of conductivity instruments.
    • High linearity cell with a cell constant of K=10.0, offers precision conductivity measurements with a range of 0 - 1000mS
    • Manufactured in graphite carbon, epoxy resin and PVDF with a riser tube in cPVC, PVDF, or 316 Stainless Steel for greater chemical and thermal resistance.
    • Detachable connector for easily and quick removal from the process for periodic calibration and cleaning.
    • Available in a standard length of 600mm with other lengths available to order.


More Information