HY-BC

Small Pulse Proportional Dosing Pump

Flow proportional dosing pump HY-BC which automatically adjusts the frequncy or speed proportional to a water meter.

The HY-BC is a small reliable chemical dosing pump which is designed to meter chemical into a process proportional to a pulsed input signal.


HY-BC Proportional Dosing Pump Introduction

The HY-BC is a small solenoid dosing pump designed as a reliable yet cost effective solution for metering chemical reagents into a process proportional to a pulsed input signal. For the HY-BC, the signal is most commonly supplied from a water meter.

Designed primarily for applications where space it as a premium, the HY-BC can be surface mounted or foot mounted using the optional foot mounting bracket. The HY-BC is able to dose either manually or proportionally.  In manual mode, the output is selected from 0 - 100% of the rated output.

Alternatively the HY-BC is able to dose proportionally to a pulsed input signal which can be supplied either from a water meter, or from a PFM relay output from a compatible instrument, such as the P7687, P6587 or P7685 pH controller.

In addition to proportional control the HY-BC will take a volt free contact from a Low Level Float Switch to automatically stop the dosing pump and prevent it operating when no chemical is present.

The HY-BC is powered from a switch mode power supply, suitable for a mains supply of 100 - 240 VAC 50hz or 60Hz.


HY-BC Dosing Pump Outputs

The HY-BC dosing pump series are available with the following outputs:-

Model Number*Output (Litres / Hour)Pressure (Bar)Speed (Strokes / Min)Output (mls / stroke)Hose Size (mm)Power (Watts)
HY-BC-12-1.5 0 - 1.5 12.0 160 0.10 4 x 6 15
HY-BC-09-03 0 - 3.0 9.0 160 0.32 4 x 6 15
HY-BC-06-06 0 - 6.0 6.0 160 0.94 4 x 6 15

HY-BC Proportional Dosing Method of Operation

The HY-BC is designed to for flow proportional dosing where the frequency or speed of the pump is automatically regulated in proportion to a pulsed volt free signal from a water meter or other piece of control equipment.

As the measured flow rate increases,  the speed of the pump increases in proportion and as the flow rate decreases the speed of the pump also decreases proportionally.

When using a water meter, the signal receives a pulse which is determined by the K Factor of the water meter.  This signal can be divided by the HY-BC to give greater control over the amount of chemical delivered.  The HY-BC has the following settings for pulse division:-

Potentiometer SettingRatioPulses (from water-meter)Strokes (from dosing pump)
100% 4:1 4 1
50% 8:1 8 1
10% 40:1 40 1

The HY-BC is limited to pulse division only, unlike the AT2-AM which offers similar outputs and the ability to multiply or divide the pulsed input signal.

Using the mls per stroke and the strength of the chemical, the effective PPM of the dosed reagent can be calculated.  This makes it ideal for flow proportional dosing of biocides and oxidising agents.

In addition to the flow proportional dosing, the HY-BC can be connected to a volt free signal which will automatically start / stop the pump.  The volt free signal input can come from a Low Level Float Switch or a Suction Lance Assembly.

The HY-BC is designed to IP65 specification, making it suitable for indoor or outdoor operation and can be foot mounted or surface mounted to a flat vertical surface.

The HY-BC dosing pump is powered from a switch mode power supply, meaning that an AC supply voltage of 100 - 240 Volts at 50Hz / 60Hz can be used to power the pump.


HY-BC Wetted Parts / Liquid End

The HY-BC is designed as a chemical metering pump for industrial usage and as such has wetted parts developed specifically for chemical handling.

  • Head Material

    The wetted parts of the pump head are manufactured in PVC.

  • Double ball valves

    Double union ball valves are manufactured in PVC with Ceramic balls 

  • Diaphragm

    The diaphragm is manufactured in PTFE.

  • Injection Valve

    The injection valves are manufactured in PVC. 

  • Foot Valve & Strainer Valve

    The foot valve and strainer assembly is manufactured in PVC.

  • Seals & O-Rings

    The seals and O-Rings are manufactured in Viton or EPDM.

As standard the pump is manufactured with wetted parts in PVC, PTFE, and Ceramic.  The seals and O-rings are available in either Viton (© DuPont / Chemours) or EPDM as requested at the time of purchasing.

Our chemical compatibility database can be used to check the wetted parts.  Please don't hesitate to get in touch if you are unsure.


What's in the box with the HY-BC?

The HY-BC is supplied complete with everything required to begin metering chemical reagents into a process.

Supplied with the dosing pump itself are:-

  • Injection Valve with 3/8" and 1/2" BSP male threaded connections
  • Footvalve & Strainer assembly
  • 1 metre of discharge tubing
  • 1 meter of suction tubing
  • Surface mounting kit

An optional foot mounting bracket can be included, for no additional charge if requested.


HY-BC Features & Benefits

The HY-BC is a small reliable proportional control dosing pump, designed to deliver chemical reagents into a process, both accurately and proportional to a pulsed input.  When operating in constant or manually adjustable dosing mode, the HY-BC can be switched on from the relay output of a piece of control equipment, enabling full automation of many small industrial processes.

Most commonly the HY-BC is paired with a water meter to provide flow proportional control of a process.  Alternatively, the pulsed input signal can come from a piece of process equipment such as a pH controller.

Designed specifically for chemical metering, the HY-BC is fitted with wetted parts which are suitable for many chemical reagents, manufactured in PVC, PTFE, Ceramic with either Viton or EPDM seals and O-rings.  Designed to IP65 specifications, the HY-BC is suitable for mounting outside.

The volt free input can be used with an optional Low Level Float Switch preventing the pump from operating when a low chemical level is present.

The HY-BC is available as the following model types:-

  • HY-BC-12-15 for an output flow rate of 1.5 Litres / Hour at 12 Bar pressure
  • HY-BC-03-09 for an output flow rate of 3.0 Litres / Hour at 9 Bar pressure
  • HY-BC-06-06 for an output flow rate of 6.0 Litres / Hour at 6 Bar pressure

Tthe HY-BC series are powered from a switch mode power supply which is able to accept a mains supply of 100 - 240 VAC at 50Hz / 60Hz the HY-BC and is an ideal piece of process control equipment destined for export.

HY-BC Specifications

  • Specifications

    Specifications

    Small Dosing Pump Proportional to Pulsed Input

    Model Number:- HY-BC

    Control Options:-

    • Constant Dosing With Manually Adjustable Output.
    • Proportional to pulsed input with 4:1, 8:1, or 40:1 division modes

    Frequency:- Max 160 Strokes / Min

    Liquid End Materials:- PVC

    Diaphragm Materials:- PTFE

    Valve Housings:- PVC & Ceramic

    Seals & O-Rings:- Either Viton or EPDM

    Inputs:-

    • Volt Free Input for Low Level Cut-Off
    • Pulsed Input signal (on/off), volt free, max 80Hz

    Input / Output Connections:- 4 x 6mm tubing

    Outputs:-

    • HY-BC-12-015:- 1.5 Litres / Hour at 12 Bar Pressure
    • HY-BC-09-03:- 3.0 Litres / Hour at 9 Bar Pressure
    • HY-BC-06-06:- 6.0 Litres / Hour at 6 Bar Pressure

    Power Consumption:- 14 Watts

    Pump Body:- Designed to meet IP65

    Mains Supply:- 100 - 240 VAC 50Hz / 60Hz

  • Ordering Information

    Model Number*Output (L / Hr)Pressure (Bar)Liquid EndSeals & O-rings
    HY-BC-12-015-PVC-V 0 - 1.5 12.0 PVC Viton
    HY-BC-09-03-PVC-V 0 - 3.0 9.0 PVC Viton
    HY-BC-06-06-PVC-V 0 - 6.0 6.0 PVC Viton
    HY-BC-12-015-PVC-D 0 - 1.5 12.0 PVC EPDM
    HY-BC-09-03-PVC-D 0 - 3.0 9.0 PVC EPDM
    HY-BC-12-015-PVC-D 0 - 6.0 6.0 PVC EPDM

    Viton (© DuPont / Chemours)

Request Product Info
How your information will be used.

Using the details that you have provided, we will contact you specifically about the product or service that you have requested information on.

We will ask you if you would like to subscribe to our email newsletters which includes The Watermark and if you wish to receive a copy of our catalogue. You are under no obligation to do so and it won't affect us contacting you about a specific product or service if you choose not too.

If you do wish to subscribe to our email newsletter you can opt out at any point and the our full data policy can be found here.

 

More Information

Related Items Proportional Control Dosing Pumps

Search