High speed direct drive industrial mixers for the mixing and blending of chemical reagents in industrial applications

High Speed Industrial Mixer

To compliment our range of electrochemical instrumentation and dosing pumps we have a range of high speed industrial mixers which are designed for liquid mixing and powder blending applications.

Designed for mixing liquid chemical reagents or for powder blending the TM Series improves contact time for reagents by improving chemical efficiency and reaction times for pH neutralisation as well as in other applications.

Suitable for use in dosing tanks, mixing effluent sumps, process vessels or storage tanks - the TM Series of high speed mixers are designed to be mounted on the tank with the shaft and propeller running to the optimal mixing point.

We custom manufacture all of our mixers at our Stafford premises, which means that if an application requires additional customisation, such as shaft lengths, additional propellers, or custom sizes, these can all be considered.

High Speed Industrial Mixer Installation

When installing a high speed industrial mixer there are a number of considerations to take into account. Firstly, never lift the mixer by the shaft. The weight of the motor compared to the shaft can cause the shaft to bend - which can cause further bending during operation.

The TM series of high speed mixers should be installed onto a bridge or tank support, and should be securely fastened to prevent any lateral movement, rocking or other movement.

The high speed mixers can run at between 750 RPM and 1450 RPM and should never be run dry or in air. Always ensure that the tank is completely full and it is recommend that at least 3/4 of the shaft be always immersed in the liquid. (Level control systems can be used to prevent dry running of high speed industrial mixers.)

It is not recommended that high speed mixers be installed into pumping tanks or sumps with varying levels, this is where a geared or slow sped mixer would be more appropriate.

For more information on the installation of high speed mixers please see our High Speed Mixer installation guide.

High Speed Industrial Mixer Applications

The TM Series are direct drive mixers where the shaft and marine style propeller are directly coupled to the motor to provide efficient mixing.

The direct drive and high ratio speed drives a marine style propeller which pushes the liquid down the tank. When installed correctly the mixers create a vortex which ensures that any powder is pushed through the liquid increasing the contact opportunity with the media.

For liquid mixing the contact opportunity is significantly increased, improving chemical efficiency in numerous applications including pH neutralisation, effluent treatment and water treatment applications.

High Speed Industrial Mixer Applications

High speed industrial mixers are predominantly used in process applications, water treatment and effluent treatment applications.

Due to the significant improvement in contact opportunity the high speed mixers excel in blending applicants and in applications where powder is mixed with water.

The high shear factor of a marine style propeller, connected to a high speed industrial mixer, means that they aren't suitable for applications affected by shearing (such as flocculant mixing) or in viscous solutions where the media tends to clear a space rather than create a vortex.

If you're unsure on whether a high speed industrial mixer or a slow speed geared industrial mixer is suitable for your application, then please don't hesitate to get in touch.

Chemically Resistant High Speed Industrial Mixer

The high speed industrial mixers are frequently used to blend chemicals in effluent treatment applications, including pH neutralisation. As such the chemicals that are used can include strong acids, alkalis's, or strong oxidising or reducing agents - depending upon the process.

We therefore offer all of our high speed industrial mixers with a chemically resistant PVC coating for use with chemicals which react with Stainless Steel.

We strongly recommend that if you have a chemical mixing application, you check that the chemicals being used are compatible with PVC. If not - please don't hesitate to get in touch.

High Speed Industrial Mixer Range


AMV-9

AMV-9

The AMV-9 is a recent addition to our line of high speed industrial mixers and is designed as a chemically resistant high speed mixer for applications in tanks up to 400 litres in capacity.

The AMV-9 has a 90mm marine style propeller manufactured in PVC and PVC coated stainless steel shaft. Unlike our other mixers the AML-9 has a fixed shaft length of either 600mm, 800mm, 900mm, or 1100 mm

Available with a 0.12kW motor suitable for a 240 V AC single phase supply and an output speed of 950 RPM.

View Product


TM0

TM0

The TM0 high speed industrial mixer is suitable for tanks up to 200 litres in capacity.

The TM0 has a 75mm propeller which is marine style and manufactured in 316 Stainless Steel with stainless steel shaft and coupling. The wetted parts of the TM0 are available with chemically resistant PVC coating.

The shaft length is manufactured to suit your application and is fitted with a 0.18kW motor suitable for a 415 V AC 3 phase supply.

The output speed of the TM0 is 1450 RPM.

View Product


TM0-SP2

TM0-SP2

The TM0-SP2 high speed industrial mixer is suitable for tanks up to 200 litres in capacity.

The TM0-SP2 has a 75mm propeller which is marine style and manufactured in 316 Stainless Steel with stainless steel shaft and coupling. The wetted parts of the TM0-SP2 are available with chemically resistant PVC coating.

The shaft length is manufactured to suit your application and is fitted with a 0.18kW motor suitable for a 240 V AC single phase supply.

The output speed of the TM0-SP2 is 1450 RPM.

View Product


TM1

TM1

The TM1 high speed industrial mixer is suitable for tanks up to 500 litres in capacity.

The TM1 has a 100mm propeller which is marine style and manufactured in 316 Stainless Steel with 316 stainless steel shaft and coupling. The wetted parts of the TM1 are available with chemically resistant PVC coating.

The shaft length is manufactured to suit your application and is fitted with a 0.37kW motor suitable for a 415 V AC 3 phase supply.

The output speed of the TM1 is 1450 RPM.

View Product


TM1-SP2

TM1-SP2

The TM1-SP2 high speed industrial mixer is suitable for tanks up to 500 litres in capacity.

The TM1-SP2 has a 100mm propeller which is marine style and manufactured in 316 Stainless Steel with 316 stainless steel shaft and coupling. The wetted parts of the TM1-SP2 are available with chemically resistant PVC coating.

The shaft length is manufactured to suit your application and is fitted with a 0.37kW motor suitable for a 240 V AC 3 phase supply.

The output speed of the TM1-SP2 is 1450 RPM.

View Product


TM2

TM2

The TM2 high speed industrial mixer is suitable for tanks up to 1250 litres in capacity.

The TM2 has a 150mm propeller which is marine style and manufactured in 316 Stainless Steel with 316 stainless steel shaft and coupling. The wetted parts of the TM2 are available with chemically resistant PVC coating.

The shaft length is manufactured to suit your application and is fitted with a 0.55kW motor suitable for a 415 V AC 3 phase supply.

The output speed of the TM2 is 960 RPM and a second marine style propellor can be fitted to the TM2 mixer if required. 

View Product


TM3

TM3

The TM3 high speed industrial mixer is suitable for tanks up to 2000 litres in capacity.

The TM2 has a 175mm propeller which is marine style and manufactured in 316 Stainless Steel with 316 stainless steel shaft and coupling. The wetted parts of the TM3 are available with chemically resistant PVC coating.

The shaft length is manufactured to suit your application and is fitted with a 0.75kW motor suitable for a 415 V AC 3 phase supply.

The output speed of the TM3 is 960 RPM and a second marine style propellor can be fitted to the TM3 mixer if required. 

View Product


TM4

TM4

The TM4 high speed industrial mixer is our biggest industrial mixer, and is suitable for tanks with a capacity up to 4000 litres in capacity.

The TM4 has a huge 200mm propeller which is marine style and manufactured in 316 Stainless Steel with 316 stainless steel shaft and coupling. The wetted parts of the TM4 are available with chemically resistant PVC coating.

The shaft length is manufactured to suit your application and is fitted with a 1.5kW motor suitable for a 415 V AC 3 phase supply.

The output speed of the TM4 is 960 RPM and a second marine style propellor can be fitted to the TM4 mixer if required.

View Product

Search