call now 01785 254 597

TM4

High Speed Mixer with 8" Propeller

high speed mixer with 8 inch propellor 415 volt three phase motor model TM4

TM4 High Speed Industrial Mixer fitted with 2 x 8 inch Ø marine style propeller with a 1.5kW 415 Volt 3 Phase Motor.


TM4 High Speed Mixer Introduction

The TM4 is a high speed industrial mixer designed for mixing and blending applications in process control, water treatment or effluent treatment applications, such as pH correction and powder mixing.

Fitted with an 8 inch or 200mm marine style propeller, the TM4 creates a vortex within a liquid solution forcing the powders or liquids to mix. The TM4 operates at 960 RPM and is powered from a 1.5kW 3 phase 415 V AC motor.

The direct drive mixer is suitable for mounting into vessels with an approximate capacity of 5000 litres, such as our 5000 Litre Chemical Storage Tank, or other similar vessels.


High Speed Mixer with 8 inch Propeller

The TM4 utilises an 8 inch propeller which forces the liquid into a vortex to provide continual mixing of liquids or powders.  The marine style propeller has a 3 petal arrangement and a tip continuous diameter of 8 inches, manufactured in 316 stainless steel.

The 8 inch propeller is held in place with a shaft and coupling arrangement, also manufactured in 316 stainless steel.  The shaft is available custom manufactured to length.

Our 8 inch propeller is designed to optimise the mixing capability by maximising the motor efficiency.  The effective mixing of the propeller is greater per horse power when compared with flat disc type mixers and other styles of propeller.


High Speed Mixer TM4 with 1.5kW 3 Phase Mixer

The standard TM4 is fitted with TEFC (Totally Enclosed Fan Cooled) direct drive motor and manufactured to IP55 specifications.  The standard motor is a 415 V three phase motor.  We also offer a 380 Volt motor, flame proof motor and we can offer a comparable air mixer for specific applications.


Chemically Resistant High Speed Mixer TM4

For use with process chemicals, we offer the TM4 with the wetted parts (shaft and 8 inch propeller) coated in PVC.  This makes the mixer suitable for mixing applications where the chemical to be coated reacts with 316 Stainless Steel.

The shaft and mixer are coated as a single piece.  This ensures that any fastenings are resistant to the reagents being used in the process.

We strongly recommend when considering a chemically resistant high speed mixer that the materials being used are compatible with PVC. 


High Speed Mixer with Two Propellers TM4

With a large shaft diameter, the TM4 is suitable for use with tanks where the dimensions are non-standard such as chemical storage vessels or where the depth is proportionally larger than the width.

With some applications it can be beneficial to incorporate a second propeller to aid with the liquid vortex formation and helping in pushing the mixed liquids or powder and liquid mix into convergence.

When specifying a mixer with a second propeller, we will request additional information about the application to ensure the motor power rating is suitable for the application. This is because the addition of a second propeller to the mixer will offer a significant increase on the load.


TM4 High Speed Mixer Features & Benefits

The TM4 is a high speed mixer, designed for continuous mixing in industrial environments.  Manufactured in house at our Stafford facility, the TM4 is available with a number of customisations, depending upon the duty required.  These include a second propeller, a 3 phase 380 VAC motor, flame proof motor, or with chemically resistant coating. Please get in touch if you require any specific customisations for use with your process.

The 8 inch propeller offers enormous mixing potential and is designed for vessels approximately 5000 Litres in capacity.  For vessels with variable liquid levels, the TM4 can be integrated with our Liquid Level Control devices, to prevent operation where a low level is present.

As a direct drive high speed mixer with totally enclosed fan cooled motor, the TM4 is designed for continuous operation with minimal preventive maintenance and to offer efficient mixing of water treatment, effluent treatment, and process control applications.

TM4 High Speed Mixer Specifications

  • Specifications

    Specifications

    High Speed Industrial Mixer 960 RPM

    Model Number:- TM4

    Frame Size:- D100

    Voltage:- 3 Phase 415 VAC

    Power:- 1.5kW or 2.0 HP

    Speed:- 960 RPM

    Flange Diameter:- 250mm

    Hole Diameter:- 4 x 15mm

    PCD:- 215mm

    Plate Hole:- 182mm

    Propellor Diameter:- 200mm / 8 Inch

    Propellor Type:- 3 Blade Marine Style

    Suitable Volume:- 4000 Litres

    Materials Of Construction:- 316 Stainless Steel (Optional PVC Coating)

  • Ordering Information

    Model NumberShaft LengthShaft / Propellor MaterialMotorPropellors
    TM4-XX XX = shaft length in mm 316 Stainless Steel 1.5kW, 3 Phase, 415 Volt AC 1 x 8 inch
    TM4-XX-EVA XX = shaft length in mm Plastic Coated 316 Stainless Steel 1.5kW, 3 Phase, 415 Volt AC 1 x 8 inch
    TM4-XX-2 XX = shaft length in mm 316 Stainless Steel 1.5kW, 3 Phase, 415 Volt AC 2 x 8 inch
    TM4-XX-2-EVA XX = shaft length in mm Plastic Coated 316 Stainless Steel 1.5kW, 3 Phase, 415 Volt AC 2 x 8 inch

    PTFE coating is also available for use with concentrated chemical reagents - please speak with our friendly sales team for more information.

    For high speed mixers with multiple propellors please get in touch with our friendly sales team so we can discuss propellor spacing.

 

Related Items Industrial Mixers High Speed

More Information

Search