pH Transmitter with 4-20mA output and Modbus
The P3436 pH Transmitter and Modbus is an ideal solution for converting the pH Transmitters output into an industry standard 4-20mA output signal, Thanks to a “current loop” 4-20 mA isolated output and RS485 serial interface, the pH transmitter can be easily connected to the most common PLC or other remote supervision and control systems.
The P3436 pH Transmitter is enclosed in a wall mountable waterproof enclosure to allow for close mounting to a pH Electrode system
pH Transmitter Introduction
The P3436 pH transmitter is the best solution for the installations where it is necessary the retransmission of the measures at distance. Thanks to a “current loop” 4-20 mA isolated output and RS485 serial interface, the transmitter can be easily connected with ease to the most common PLC or other remote supervision and control systems.
The P3436 pH Transmitter allows easy installation due to its small size and removable terminal blocks to facilitate the installation and maintenance in control cabinets or waterproof enclosures for DIN Rail Components.
pH or Redox Transmitter
|0 - 14.00pH||0 - 2000mV|
|-1000 - +1000|
4-20mA pH Transmitter offers easy Calibration
The calibration and the configuration of the P3436 transmitter can be done locally or remotely via the serial interface with the use of dedicated keys, standard solutions such as pH 4, pH 7, pH 9 and 220mV are already stored within the transmitters memory and are automatically recognised when calibrating the device.
The P3436 pH Transmitter contains filter software and can set two filters to obtain a stable reading and faster response to the variations of the measurement in the process, The P3436 supports both Analog & Digital modes that can be used simultaniously.
P3436 pH Transmitter and Modbus Specifications
Inputs:- pH electrodes (glass or antimony),ORP electrodes,Pt100
Zero:- ± 2 pH, ± 100 mV, ± 5 °C, ± 9 °F
Sensitivity:- 80 - 110 % (70 - 140 % antimony)
Resolution:- 0.01 pH, 1 mV, 0.1 °C/°F
Accuracy:- 0.2 %
Repeatability:- 0.1 %
Non-linearity:- 0.1 %
Filter software:- large signal: 2 seconds, small signal: 1÷20 seconds
Analog output:- 4-20 mA, Rmax 600 ohm
Operating Temperature:- 0 - 50 °C
Humidity:- 95 % without condensation
Power supply:- 9/36V DC
Weight:- 250 g
Dimensions:- 71x95x58 mm (4 DIN modules)
- Easy to use precision pH controller with 2 set points for on / off control.
- Din rail or surface mounting in a nice small enclosure.
- Easy calibration procedure even for untrained operators with adjustment of Zero and Span via front mounted potentiometers.
- Clear crisp display so the pH value, set-point setup and calibration procedure can be easily checked and adjusted as required.
- Isolated 4-20mA output for easy integration with a digital chart recorder or PLC