call now 01785 254 597


2" Water Meter For Cold Water

2 Inch or 50mm Water Meter for Cold Water

2" brass bodied water meter for measuring the volume of flow through pipework with pulsed output and flow totalisation.

2" BSP Water Meter CTFI 50 Introduction

The CTFI 50 is a 2" BSP threaded contacting head water meter, manufactured with a brass body for use with clean water and ideally suited for process applications where accurate measurements of water flow are required.

Designed for use with clean water, such as towns water, the CTFI 50 is rated to a temperature up to 30°C and a pressure of up to 16 Bar.  The CTFI 50 may be installed in any position and provides precision flow measurements with a maximum flow rate of 15 m3 / Hr.

The robustly constructed water meter is designed to be screwed into pipework using the 2" threaded connection, to measure the volume of water flowing past the water meter.

The 2" BSP water meter CTFI 50 has a high sensitivity turbine impulse sensor which drives a large accurate gear train to provide both totalisation and the pulsed output.

2" BSP Water Meter With Pulsed Output

The turbine sensor is both antimagnetic and non-hygroscopic and drives a large and accurate gear train.

The resulting digital signal is via pulsed volt free contacts, proportional to the flow rate - the K Factor of the 2" BSP Water meter CTFI 50 is K = 10.0, giving 1 pulse per 10 litres.

The pulsed output signal is rated at 24 V - 0.2 A and supplied cable length is 2 metres.

The CTFI 50 can be easily integrated into a dosing pump; batch controller; external counter or other piece of process control equipment that corresponds to a pulsed input, proportional to liquid flow rate.

2" BSP Water Meter With Totalisation

As well as delivering a pulsed output signal the CTFI 50 has a mechanical non-resettable counter which is displayed on the front of the water meter.  The 5 digit mechanical counter displays the total volume of liquid that has flowed through the water meter in M3.

The mechanical counter and water meter frontage are covered in a transparent cover, manufactured in clear epoxy resin.

2" BSP Water Meter CTFI 50 Features & Benefits

The CTFI 50 is an excellent way of measuring clean water entering a process. Used frequently on evaporative cooling tower make up water; softener feed water; in plating baths makeup water; to control flow proportional dosing and in any application where the volume of water flowing in a pipeline needs to be accurately measured.

The CTFI 50 is of simple design and proven construction.  Designed to provide reliable; accurate; dependable measurement and to control many industrial processes, the CTFI 50 is a water meter with a 2" BSP threaded connection, so securing it in place for a long operational life is as simple as possible.

CTFI 50 Specifications

  • Specifications


    2" BSP Threaded Water Meter

    Model No:- CTFI 50

    Connection:- 2" BSP thread (50mm)

    Body:- Cast Iron case and head

    Head:- Cast in clear epoxy resin

    Turbine:- Non-hygroscopic and antimagnetic

    Constant / K Factor:- K = 10.0 (1 pulse per 10.0 Litres)

    Contacting Head Output:- Reed Switch rated at 5 VA

    Sensitivity:- 50 L/Hr

    Instantaneous Max. Flow Rate:- 30 m/ Hr

    Flow 1 Bar Pressure Drop:- 30 m/ Hr

    Normal Flow:- 15 m/ Hr

    Min. Flow for 5% Accuracy:- 450 L / Hr

    Min. Flow for 2% Accuracy:-  3000 L / Hr

    Max Working Pressure:- 16 Bar

    Max Temperature:- 30°C

    Min Reading:- 0.1 Litres

    Max Reading:- 106 m3

    Turbine Revs per Litre:- 3.16 Revs / L

    Length Less Fittings:- 300mm

    Length With Fittings:- 460mm

  • Features


    • Brass bodied water meter with high sensitivity turbine sensor designed specifically for process control applications using clean water.
    • The high sensitivity non-magnetic and hygroscopic impulse sender drives a large accurate gear train to ensure precision totalisation counts and pulsed outputs.
    • Pulsed output with a K = 10.0 constant to give 1 pulse per 10 litres of water - ideal for counting incoming makeup water. 
    • Totalisation is displayed on a mechanical non-resettable counter allowing the total volume of water that has passed through the water meter to be monitoring dependably and easily.
    •  Proportional digital pulsed output signal which corresponds to the K constant - provides a useable signal to external control devices such as batch counters, controllers, dosing pumps and other control equipment.
    • Proven design of simple & construction to provide reliable, accurate, and dependable measurement and control of many industrial processes.


More Information