9072-10B

Low Conductivity pH Electrode

low conductivity ph electrode model 9072 10B

Our Low Conductivity pH Electrode has been designed specifically for applications in solutions with a low conductivity.  Where other electrodes would be susceptible to a poor response time and electrode leaching, the 9072-10B offers a fast response time and resistance to electrode leaching.

Low Conductivity pH Electrode Model 9072-10B Introduction

The 9072-10B is a glass bodied, sealed, combination, double junction pH electrode with an over sized glass bulb made from a special low impedance glass, specifically designed for use in low conductivity solutions. Due to the double junction in the 9072-10B low conductivity pH electrode, it can also be used in applications where the solutions react with silver.

The 9072-10B low conductivity pH electrode is suitable for use in both laboratory and industrial applications. When pairing the 9072-10B with an inline electrode holder, we strongly recommend exercising caution during the installation. The large over sized glass dome increases the surface area for readings in low conductivity solution but it is delicate and pressure on the glass dome can cause it to break.

The low conductivity pH Electrode model 9072-10B has a double junction to prevent low conductivity solutions from leaching the electrode reference solution. The reference junction is annular, peripheric, ceramic and non-fouling. The reason that this electrode performs so well in low conductivity applications is because the glass bulb is made from our special low impedance glass and the large over sized domed shape increases surface area and in turn increases the precision and response time. This electrode is specifically designed for use when the conductivity of the solution is low.

Low Conductivity pH Electrode Model 9072-10B Features & Benefits

The 9072-10B is designed to perform in situations where other pH electrodes aren't able to.

The 9072-10B offers unparalleled repeatability; a non-fouling peripheric annular double junction, which is resistant to electrode leaching in low conductivity environments and electrode poisoning for solutions which react to silver. In addition, the large over size domed glass is made from a special low impedance glass to give accurate and rapid readings, even in low conductivity solutions.

This pH electrode has been uncompromisingly designed for use in low conductivity environments and as such it is only suitable for a pH range of 0-11 pH and at temperatures of 0-50°C.

The 9072-10B pH electrode is widely used with our pH controller range, our inline electrode holders and our portable pH meters.

The mounting cap on the low conductivity pH electrode model 9072-10B is Ryton with a small flange for mounting into our PES style holders.

Low Conductivity pH Electrode Model 9072-10B Connection Type & Cable Lengths

The 9072-10B pH electrode is available with a number of connection types.  As standard we supply the 9072-10B with 3 metres of connecting cable and a BNC fitting.

For custom fitting types please see the below table for the ordering number and options:-

When ordering, please specify model using 9072 and then the name convention defined in the following table for cable and connection type:-

9072-10B Specififcations

  • Specifications

    Specifications

    Double Junction pH Electrode

    Model No:- 9072-10B

    Range:- 0-11 pH

    Operating temperature:- 0-50ºC

    Electrode type:- Low conductivity pH electrode with very low impedance glass and over-sized dome bulb

    Junction:- Double Junction

    Reference Type:- Non-fouling Peripheric Annular Ceramic with Silver - Silver Chloride reference

    Dimensions:- 110mm Long x 12mm ø

    Additional:- Large over sized pH bulb made from very low impedance glass for accurate pH measurement in low conductivity environments

  • Ordering Information

    Model NumberCable LengthConnector
    9072-3B 1 Metre BNC Connector (Most Common)
    9072-10B 3 Metres BNC Connector (Most Common)
    9072-S8 N/A S8 Connector (No Cable)
    9072-3T 1 Metre Stripped & Tinned Connections
    9072-10T 3 Metres Stripped & Tinned Connections
    9072-3A 1 Metre U.S. Standard Connector fitted to older U.S. pH Instruments
    9072-10A 3 Metres U.S. Standard Connector fitted to older U.S. pH Instruments
    9072-3I 1 Metre Din 19262 Connector for German pH Instruments
    9072-10I 3 Metres Din 19262 Connector for German pH Instruments
    9072-3K 1 Metre Belling Lee Connector for older U.K. pH Instruments
    9072-10K 3 Metres Belling Lee Connector for older U.K. pH Instruments

    For more information on the connection type please take a look at our pH electrode connection types page.

    Electrodes with a longer cable or custom cable length are available to order.

Request Product Info
How your information will be used.

Using the details that you have provided, we will contact you specifically about the product or service that you have requested information on.

We will ask you if you would like to subscribe to our email newsletters which includes The Watermark and if you wish to receive a copy of our catalogue. You are under no obligation to do so and it won't affect us contacting you about a specific product or service if you choose not too.

If you do wish to subscribe to our email newsletter you can opt out at any point and the our full data policy can be found here.

More Information

Search