call now 01785 254 597

HY-BL

Small Chemical Dosing Pump with Low Level Cut-Off

manually adjustable dosing pump HY BL with low level cut-off

The HY-BL is a small reliable chemical dosing pump with a low level cut off for water treatment applications.


HY-BL Small Dosing Pump Introduction

The HY-BL is a small solenoid dosing pump, designed as a reliable yet cost effective solution for metering chemical reagents into a process.

Designed primarily for applications where space is at a premium, the HY-BL can be surface mounted or foot mounted using the optional foot mounting bracket.  The HY-BL is designed to dose continually with the output flow rate manually adjustable using the front mounted potentiometer.

The HY-BL is powered from a switch mode power supply, suitable for a mains supply of 100 - 240 VAC 50hz or 60Hz.


HY-BL Dosing Pump Outputs

The HY-BL dosing pumps series are available with the following outputs:-

Model Number*Output (Litres / Hour)Pressure (Bar)Speed (Strokes / Min)Output (mls / stroke)Hose Size (mm)Power (Watts)
HY-BL-12-1.5 0 - 1.5 12.0 160 0.10 4 x 6 15
HY-BL-09-03 0 - 3.0 9.0 160 0.32 4 x 6 15
HY-BL-06-06 0 - 6.0 6.0 160 0.94 4 x 6 15

HY-BL Method of Operation

The HY-BL is incredibly simple to operate.  With power applied to the dosing pump, the HY-BL will begin metering chemical into a process at a desired rate, using the front mounted potentiometer.  For low chemical dosing modes (below 20% of the rated output), the pump has a special low dosing mode which which can be selected using the selector switch. This restricts the output to a maximum of 20% of the rated output and the user can increase or decrease the flow rate anywhere on the 0 - 20% range, using the front mounted potentiometer.

The pump can either be permanently powered or switched on by using the relay output from a piece of control equipment, such as a pH Controller, cooling water controller or other piece of process control equipment.

With a fixed stroke length, the flow rate of the pump can be reduced using the front mounted potentiometer which adjusts the stroke frequency and therefore ensures precision control of the flow rate.

In addition to the potentiometer turn down feature, the HY-BL can be connected to a volt free signal which will automatically start / stop the pump.  The volt free signal input can come from a Low Level Float Switch or a Suction Lance Assembly.

The HY-BL is designed to IP65 specification, making it suitable for indoor or outdoor operation.  It has the option to be foot mounted or surface mounted to a flat vertical surface.

The HY-BL dosing pump is powered from a switch mode power supply, meaning that an AC supply voltage of 100 - 240 Volts at 50Hz / 60Hz can be used to power the pump.


HY-BL Wetted Parts / Liquid End

The HY-BL is designed as a chemical metering pump for industrial usage and as such has wetted parts developed specifically for chemical handling.

  • Head Material

    The wetted parts of the pump head are manufactured in PVC.

  • Double ball valves

    Double union ball valves are manufactured in PVC with Ceramic balls 

  • Diaphragm

    The diaphragm is manufactured in PTFE.

  • Injection Valve

    The injection valves are manufactured in PVC. 

  • Foot Valve & Strainer Valve

    The foot valve and strainer assembly is manufactured in PVC.

  • Seals & O-Rings

    The seals and O-Rings are manufactured in Viton or EPDM.

As standard the pump is manufactured with wetted parts in PVC, PTFE, and Ceramic.  The seals and O-rings are available in either Viton (© DuPont / Chemours) or EPDM as requested at the time of purchasing.

Our chemical compatibility database can be used to check the wetted parts.  Please don't hesitate to get in touch if you are unsure.


What's in the box with the HY-BL?

The HY-BL is supplied complete with everything required to begin metering chemical reagents into a process.

Supplied with the dosing pump itself are:-

  • Injection Valve with 3/8" and 1/2" BSP male threaded connections
  • Footvalve & Strainer assembly
  • 1 metre of discharge tubing
  • 1 meter of suction tubing
  • Surface mounting kit

An optional foot mounting bracket can be included for no additional charge, if requested.


HY-BL Features & Benefits

The HY-BL is a small reliable solenoid dosing pump, designed to accurately deliver chemical reagents into a process.  The HY-BL can be switched on from the relay output of a piece of control equipment, enabling full automation of many small industrial processes.

Designed specifically for chemical metering, the HY-BL is fitted with wetted parts which are suitable for many chemical reagents.  Wetted parts are PVC, PTFE, Ceramic with either Viton or EPDM seals and O-rings.  Designed to IP65 specifications, the HY-BL is suitable for mounting outside.

The volt free input can be used with an optional Low Level Float Switch, preventing the pump from operating when a low chemical level is present.

The HY-BL is available as the following model types:-

  • HY-BL-12-15 for an output flow rate of 1.5 Litres / Hour at 12 Bar pressure
  • HY-BL-03-09 for an output flow rate of 3.0 Litres / Hour at 9 Bar pressure
  • HY-BL-06-06 for an output flow rate of 6.0 Litres / Hour at 6 Bar pressure

As the HY-BL series are powered from a switch mode power supply, they are able to accept a mains supply of 100 - 240 VAC at 50Hz / 60Hz making the HY-BL an ideal piece of process control equipment destined for export.

HY-BL Specifications

  • Specifications

    Specifications

    Small Reliable Dosing Pump

    Model Number:- HY-BL

    Control Options:- Constant Dosing With Manually Adjustable Output

    Frequency:- Max 160 Strokes / Min

    Liquid End Materials:- PVC

    Diaphragm Materials:- PTFE

    Valve Housings:- PVC & Ceramic

    Seals & O-Rings:- Either Viton or EPDM

    Inputs:- Low Level Cut-Off

    Input / Output Connections:- 4 x 6mm tubing

    Outputs:-

    • HY-BL-12-015:- 1.5 Litres / Hour at 12 Bar Pressure
    • HY-BL-09-03:- 3.0 Litres / Hour at 9 Bar Pressure
    • HY-BL-06-06:- 6.0 Litres / Hour at 6 Bar Pressure

    Power Consumption:- 14 Watts

    Pump Body:- Designed to meet IP65

    Mains Supply:- 100 - 240 VAC 50Hz / 60Hz

  • Ordering Information

    Model Number*Output (L / Hr)Pressure (Bar)Liquid EndSeals & O-rings
    HY-BL-12-015-PVC-V 0 - 1.5 12.0 PVC Viton
    HY-BL-09-03-PVC-V 0 - 3.0 9.0 PVC Viton
    HY-BL-06-06-PVC-V 0 - 6.0 6.0 PVC Viton
    HY-BL-12-015-PVC-D 0 - 1.5 12.0 PVC EPDM
    HY-BL-09-03-PVC-D 0 - 3.0 9.0 PVC EPDM
    HY-BL-12-015-PVC-D 0 - 6.0 6.0 PVC EPDM

    Viton (© DuPont / Chemours) 

 

More Information

Search