call now 01785 254 597

TR3645-W

Surface Mounting Temperature Controller

Surace mounting temperature controller TR3645-W

Surface Mounting Temperature Controller

The Model TR3645-W Temperature Controller is designed to be easy to use; accurate; provide control options for simple control applications and a 4-20mA output signal for integration with industrial control options.

The TR3645-W is designed to pair with a 3 Wire PT100 Temperature Sensor to give a measuring and controlling range between - 20°C to + 120°C.

The TR3645 is available as a Din rail mounted unit for mounting in a control panel, or as the TR3645-W in a surface mounting enclosure.

Designed with the operator in mind, the TR3645-W is easy to use and has a large easy to read LCD (liquid crystal display) displaying the measured temperature in °C.

The TR3645-W can be powered from either 115 VAC or 230 VAC 50 / 60Hz.


Temperature Controller TR3645 Dimensions

When the TR3645 is provided in din rail mounting configuration it measures just 105 mm wide x 100 mm high x 58 mm deep.  When supplied in the surface mounting enclosure the unit measures 135 mm wide x 170 mm high and 115mm deep.

When in surface mounting configuration the conductivity controller has a clear door for easy access to the simple to use controls, allowing the operator to calibrate the instrument or set the two set points from the front panel.

The values of the set-point is easy to determine using the front mounted potentiometers.  By selecting a value at which the set-point should operate and either high or low level operation to engage the set-point.  The system has a set-point LED to illustrate the relay state and for checking the relays during setup or commissioning.


Temperature Controller TR3645-W Setpoint with On/Off Control Relay

The TR3645-W has an easy to programme On/Off control setpoint with an adjustable time delay of up to 40 seconds before the relay operates. The relay co-operation can be selected for either High or Low operation via a control switch.

When the setpoint is configured for use under low operation, then when the monitored temperature value is lower than the setpoint value, the LED is lit and the corresponding relay is activated.  If the relay has the delay function activated then the timer will be called until the relay is activated.

For use under high operation, then when the monitored temperature value is higher than the setpoint, the LED is lit and the corresponding relay is activated.  Again, if a delay has been assigned to the relay then the relay will wait until this delay has expired, before activating the relay.

As the TR3645-W is an easy to use temperature controller with excellent control options, it makes an excellent choice of cost effective temperature controller for many processes, including simple engagement and disengagement of a heater, alarm circuitry or for integration into larger systems where temperature is measured or controlled.


TR3645-W easy to use Conductivity Controller with 4-20mA Output

The TR3645-W surface mounting temperature controller has an industry standard 4-20mA output.  This 4-20mA output can be used with a variety of control equipment, including PLC's and Chart Recorders.  The 4-20mA output in this instrument is non-expandable, meaning that it corresponds precisely to the measured range of the instrument selected.

TR3645-W Controller Specifications

  • Specifications

    Specifications

    Model No:- TR3645-W

    Temperature Range:- -20°C to +120°C

    Supported Temperature Sensor:- PT100 (3 Wire PRT)

    Set Points:- 1 on / off, high / low selectable, 5 Amp 220 VAC resistive load

    Action:- On/Off over 100% of range

    Hysteresis:- ± 0.4%

    Switching Time:- <0.5 s 

    Time Delay:- 0 - 40 seconds adjustable

    Current output:- 0 - 20/ 4 - 20mA

    Zero:- ±10%

    Slope:- ±20%

    Ambient Temperature:- 0 - 50°C

    Mains Supply:-220 Volt / 110 Volt, 50 / 60Hz

    Weight:- 265 grams DIN version

    Dimensions:- 100 x 95 x 58mm

  • Features

    Features

    • Easy to use precision surface mounted temperature controller with set point for on / off control, complete with delay timer.
    • Works with any of our range of precision platinum resistance thermometer PT100 temperature sensors.
    • Din rail mounting or surface mounting in a compact enclosure with makalon access door.
    • Easy calibration procedure even for untrained operators with adjustment of Zero and Span via front mounted potentiometers.
    • Clear crisp display so the temperature value, set-point setup and calibration procedure can be easily checked and adjusted as required.
    • 4-20mA output for easy integration with a digital chart recorder, PLC or online data logger
  • Data Sheets

    Data Sheets

 

More Information

Search