Injection Valves / Non-Return Valves
We supply a range of replacement injection valves for use with our range of solenoid dosing pumps. Each injection valve acts as a non-return valve so that when the injection valve is connected to the point on which the chemical reagent is to be delivered into the process, the chemical reagent can flow out, but the process solution cannot flow back up the delivery pipework.
Our injection valves are designed specially for use with chemical reagents and are available manufactured in either PVC or PVDF. There are options on the seals and o-rings to ensure compatibility with the chemical reagent that you're using.
The non-return mechanism for each of the inception valves is manufactured with a Hastelloy-C spring with a ceramic ball valve. PTFE coated alternatives are viable for concentrated chemical reagents that react with ceramic or Hastelloy-C. As with all process equipment, we recommend that you check that the wetted parts are compatible with the chemical to be used by either checking our chemical compatibility database or speaking with your chemical supplier.
Fitting An Injection Valve
Each injection valve is designed for use with dosing tube and is either sized for the following tubing sizes:-
- 4x6mm
- 8x10mm
- 8x12mm
The tubing is connected via a specially manufactured compression fitting and the process side contains a dual thread for both 3/8" BSP and 1/2" BSP.
Injection Valve Range
10413PVC in PVC for 4x6mm
The 10413PVC injection valve with integral non-return valve manufactured in PVC.
The 10413PVC is suitable for use with 4x6mm dosing tube and carries both a 3/8" and 1/2" BSP threaded connection, for installation directly into a process.
The 10413PVC is available with a choice of seal and O-ring materials to ensure compatibility with your process.
10413PVCGP in PVC for 8x12mm
The 10413PVCGP injection valve with integral non-return valve manufactured in PVC.
The 10413PVCGP is suitable for use with 4 x 6mm dosing tube and carries both a 3/8" and 1/2" BSP threaded connection for installation directly into a process.
The 10413PVCGP is available with a choice of seal and O-ring materials to ensure compatibility with your process.
10413P in PVDF for 4x6mm
The 10413P injection valve with integral non-return valve manufactured in PVDF.
The 10413P is suitable for use with 4 x 6mm dosing tube and carries both a 3/8" and 1/2" BSP threaded connection for installation directly into a process.
The 10413P is available with a choice of seal and O-ring materials to ensure compatibility with your process.
10413PGP in PVDF for 8x12mm
The 10413PGP injection valve with integral non-return valve manufactured in PVDF.
The 10413PGP is suitable for use with 8 x 12mm dosing tube and carries both a 3/8" and 1/2" BSP threaded connection for installation directly into a process.
The 10413PGP is available with a choice of seal and O-ring materials to ensure compatibility with your process.