At Automated Water & Effluent Ltd we have been manufacturing our simple industrial mixer range for a long time. Originally conceived to enable us to offer our customers a cost effective way of mixing effluent with treatment chemicals, as time has passed we've expanded our industrial mixer range to incorporate mixers and agitators for a number of different applications. Our range now includes a high speed industrial mixer range, our geared slow speed mixer range and we also offer an air mixer range for use in ATEX environments.
Our high speed industrial mixer range have been developed to help our customers with mixing and blending applications for liquids in tanks. Commonly used for waste water applications and pH correction to improve the efficiency of chemical reagents in effluent tanks - the high speed mixers utilise a marine style propellor and direct drive shaft.
The TM range of high speed mixers offer output speeds of up to 1450 RPM down to 900 RPM and are suitable for blending of powders in liquids, effluent mixing, and process mixing. The high shear mixers are manufactured in 316 Stainless Steel and we offer a PVC coating on all of our TM range of mixers to allow them to operate with chemical reagents which react with stainless steel.
The high speed mixer range are suitable for both cylindrical dosing tanks or storage tanks, baffled tanks, and process vessels. We strongly advise against running a high speed mixer in a tank with a low liquid level and suggest using our level controllers to prevent operation of a mixer when a low level is present.
To compliment our TM Series of high speed direct drive industrial mixers, we also offer a range of geared mixers to provide slow speed agitation or stirring. Our range of slow speed geared industrial mixes are our GMW series.
The GMW Series of mixers are manufactured with a heavy duty worm drive gearbox to slow the rotational speed of the shaft down. Output ranges of our geared industrial mixers are from 65 RPM up to 240 RPM depending on the capacity of the process to withstand mixer shear. The power is provided from a range of motors running from 110 VAC single phase through to 415 V AC three phase, allowing us to accommodate a large range of applications from very viscous solutions to very large vessels.
Developed for process agitation in viscous solutions, the preparation of flocculent, mixing effluent with flocculent for effluent treatment, or in any application which requires a steady even mix of the solution. The slow speed industrial geared mixer range are suitable or operation in cylindrical dosing tank, baffled tanks, storage vessels or bespoke process vessels. We suggest that with very viscous solutions ( > ~ 10'000 CPS) we suggest avoiding a cylindrical dosing tanks.
The geared mixer range utilise a flat bladed impeller with a variety of diameters from 10" Ø through to 20" Ø. We also offer a custom sizes of impeller for use in IBC mixing or much larger very large process vessels.
We have developed a range of mixers powered by air motors. These use a compressed air source to drive a shaft and propellor for use in applications where a supply voltage can be hazardous, such as ATEX environments.
Due to the specialised nature of mixing in ATEX environments if you require more information on this - then please don't hesitate to get in touch.
All of our ranges of industrial mixer are available with a PVC coating for use in chemical applications.
When considering using a mixer in an applications with concentrated reagents or any other chemical application - we strongly recommend checking that the chemical is compatible with PVC. If you're unsure please don't hesitate to get in touch.
Our TM range of high speed industrial mixers with direct drive shafts and marine style propellors.
The TM range are manufactured in 316 Stainless Steel with optional chemically resistant coating for use with chemical reagents that react with stainless steel.
The high speed industrial mixer range are available with output speeds from 1450 to 950 RPM and with a range of motor types from 0.18kW to 1.5 kW. Propellor diameters range from 3" through to 8" marine style designs with single propellor and dual propellor mounting options available.
Our GMW range of slow speed geared industrial mixers complete with gear box and flat bladed impellers.
The GMW range are manufactured in 316 Stainless Steel with optional chemically resistant coating for use with chemical reagents that react with stainless steel.
The slow speed geared industrial mixer range are available with reaction ratio gear boxes giving an output speed from 245 RPM down to 65 RPM depending on duty with very small motors from 0.09kW up to 3.00 kW with 110 VAC single phase options in the smaller sizes.
Impeller diameters range from 10" through to 20" as standard with single, dual and triple impeller options available.