Suction Lance Assembly for 300 Litre Tank
AC.LA.3 & AC.LA.3A Chemical suction lance assemblies for use with a 300 Litre dosing tank and measures 1250mm long as standard.
AC.LA.3 Suction Lance Introduction
The AC.LA.3 and AC.LA.3A are suction lance assemblies which are designed to be mounted into a 300 Litre chemical dosing tank for use with chemical dosing pumps. The suction lance assemblies help a dosing pump to remain primed and give a signal on a low chemical level.
We offer two different types of suction lance assembly for 300 Litre chemical containers.
- The AC.LA.3 which uses 4x6mm dosing tube - for use with our HY, AT1, AT2 and AT3 range of dosing pumps which support a low level / alarm input.
- The AC.LA.3A which uses 8x12mm PVC dosing tube or 8x10mm PVDF tubing - for use with the AT4 range of dosing pumps which support a low level / alarm input.
Both the AC.LA.3 and the AC.LA.3A provide a volt free contact closure when the chemical level is 50mm above the lowest suction point. This can be connected directly to the dosing pumps that support either a low level or alarm input such as the HY-Series, AT-BL, AT-AM, or AT-MT series, or alternatively into a PLC, BMS or other device which supports a volt free contact closure.
The chemical is delivered to the pumps suction side through a fluoropolymer elastomer non-return valve. This is mounted inside the 300 litre suction lance inlet and prevents the chemical from returning back down the suction lance assembly. Inside the riser tube runs a length of suction tubing which is manufactured in either soft PVC, PTFE or PVDF. The AC.LA.3 is available with 4x6mm PVC, PTFE or PVDF, the AC.LA.3A is available with 8x12mm PVC or 8x10mm PVDF only.
300 Litre Suction Lance Wetted Parts
The AC.LA.3 is designed to be permanently mounted into the a chemical container such as 300 Litre Dosing Tank, or container with a maximum height of approx 1250mm.
Each suction lance is available with a selection of wetted parts highlighted in the below table which are designed to ensure compatibility with a very wide range of chemical processes.
|Riser Tube||Non-Return Valve||Float||Suction Tubing|
|PVC, cPVC or PVDF||EPDM or Viton||PVDF||PVC, PVDF or PTFE*|
*PTFE Is only available with the AC.LA.3 not the AC.LA.3A.
We strongly recommend you check the wetted parts of the injection valve against our chemical compatibility database or speak with your chemical supplier, to ensure that all the parts are compatible with the chemical to be dosed.
300 Litre Suction Lance Dimensions
As standard, both the AC.LA.3 for 4x6mm tubing and the AC.LA.3A for 8x12mm suction tubing are manufactured to a length of 1250mm.
They include a 70mm diameter conical flange which is designed to allow the height of the suction lance assembly to be adjusted so that it matches the depth of the chemical dosing tank.
The suction lance can be supplied in custom lengths if the required length is different from those in our range.
The widest inserted section of the suction lance assembly measures 31mm Ø allowing the suction lance to remain rigid, while also offering a compact size for easy insertion into a chemical vessel.
For the AC.LA.3 with 4x6mm tubing, the riser tube of the suction lance assembly measures 21mm Ø with space for both the low level signal cable and suction tubing.
The AC.LA.3A with 8x12mm or 8x10mm tubing is housed in a wider riser tube measuring 31mm Ø with space for both the low level signal cable and the suction tubing.
Installing the suction lance assembly is very straight forward. Prior to immersing the suction lance into the chemical, we strongly recommend that the electrical connections are connected to either the dosing pump or piece of control equipment that will be receiving the volt free signal.
As standard the float switch is designed to provide a normally closed (NC) signal on a low level.
The user can change the direction of the float switch by simply unscrewing the lower mounting and changing the direction of the float switch so that a normally closed contact is given on a high level.
The PVC cable should then be connected to the control equipment.
The suction lance assembly has the following electrical ratings:-
- maximum current of 1amp
- maximum power 50W
- maximum voltage of 200 VDC or 300 VAC
The suction tubing is normally connected to a dosing pump by pushing it through a lock nut and compression ring before sliding it over a conical connector in the same way that a standard foot valve and strainer assembly is connected. It's important to ensure that the suction tubing is free from kinks.
Installing the suction lance into the 300 Litre vessel or chemical tank of equivalent height is straight forward. We recommend drilling a 32mm Ø hole in the top of the tank, to allow the suction lance assembly to slide inside.
Creating a permeant access point for the suction lance assembly is preferable to permanently unscrewing the lid of a dosing tank or leaving the man-way access point of the tank open.
Using the flange, the height of the suction lance assembly can be adjusted to match the depth of the tank, allowing the bottom of the suction lance to rest on the bottom of the tank, leaving the inlet free to operate without restriction.
One major advantage of using a suction lance assembly is that they allow a chemical container to be quickly and easily changed with minimal interference into a process. For applications where this isn't required, the flange has 4 mounting holes which can be used to bolt or screw the flange into place.
We recommend using the suction lance assembly in non-viscous solutions where the fluid in contact with the suction lance is free from solids. Any build up of solids can become trapped between the PVDF float and the assembly, preventing the float switch from functioning correctly.
Suction lances are suitable for an operating temperature of -20°C to + 55°C when manufactured in PVC with higher ranges for suction lances manufactured in PVDF or cPVC.
When operating normally the non-return valve inside the suction lance assembly will allow the chemical to be drawn into the suction tubing but not to return back down the suction tubing.
AC.LA.3 & AC.LA.3A Features & Benefits
Each suction lance assembly is a simple reliable way of ensuring that a dosing pump remains primed, due to the integral non-return valve.
Manufactured with a choice of chemically resistant materials to ensure compatibility with a wide range of chemical reagents, there are also options on the suction tubing to suit 4x6mm dosing pumps in the AC.LA.3 and either 8x10mm or 8x12mm tubing in the AC.LA.3A, for use with higher output dosing pumps such as the AT4 series.
The float is manufactured in chemically resistant PVDF and will give a low level signal when the chemical is 50mm above the lowest suction pump. With a simple volt free contact operation, each suction lance assembly is compatible with a wide range of equipment, including direct connection to dosing pumps, PLC's, BMS's or can be integrated into control panels and other electrical circuits.
The conical flange allows the suction lance assembly to be mounted into a 300 Litre chemical container and the height to be manually adjusted with the mounting holes for securing the assembly into place.
In addition to the mounting holes, each suction lance assembly can be manufactured to a desired length if required for a specific application.
AC.LA.3 & AC.LA.3A Specifications
Suction Lance Assembly With Low Level Float for 300 Litre Tank
Model Number:- AC.LA.3 for 4x6mm and AC.LA.3A for 8x12mm
Riser Tube Material:- PVC
Rise Tube Length:- 1250mm
Riser Tube Diameter (AC.LA.3):- 21mm
Riser Tube Diameter (AC.LA.3A):- 34mm
Dosing Tube Material:- PVC
Dosing Tube Size:- 4x6mm / 8x10mm / 8x12mm
Float Material:- PVDF
Mounting Type:- Conical Flange
Non-return Valve Type:- Fluoropolymer Elastomer
Temperature Range (PVC):- -20°C - +55°C
Cable Length:- 2 Metres
Maximum Power:- 50W
Maximum Voltage:- 200 VDC or 300 VAC
Maximum Current:- 1A
By connecting the suction lance assembly to the dosing pump the integral non-return valve ensures that the dosing pump is kept primed and ready to operate.
When the chemical level in the 300 litre dosing tank falls to 50mm above the suction point the low level float falls. This causes a normally closed connection (which can be manually adjusted to a normally open connection by inverting the float) which delivers a volt free contact to trigger the dosing pump directly or another piece of control equipment.
Sucton lance assemblies provide a straight forward way of ensuring that a dosing pump is primed. Automation of processes can be achieved by using the volt free output including:-
- Prevent the dosing pump from operating when a low chemical level is present
- Trigger an alarm to alert an operator that the chemical level is low
- Provide remote communications, a PLC or a BMS system.
Suction lance assemblies also promote safe chemical handling, by providing an operator a simple way of removing the chemical lance when the chemical container is empty, and inserting it into a new container when required - removing the need for soft and flexible PVC suction tubing from being manually handled.
Each suction lance assembly is available with a number of options on the wetted parts to ensure compliance with a wide range of chemical reagents.
The length of each suction lance can be modified to suit specific applications or adjusted using the manually adjustable conical mounting flange.
Model Number Riser Tube Suction Tubing Suction Connection Non-Return Valve AC.LA.3 PVC PVC 4x6mm Viton AC.LA.cP.3 cPVC PVC 4x6mm Viton AC.LA.cP.T.3 cPVC PTFE 4x6mm Viton AC.LA.PV.T.3 PVDF PTFE 4x6mm Viton AC.LA.PV.PV.3 PVDF PVDF 4x6mm Viton AC.LA.3.E PVC PVC 4x6mm EPDM AC.LA.cP.3.E cPVC PVC 4x6mm EPDM AC.LA.cP.T.3.E cPVC PTFE 4x6mm EPDM AC.LA.PV.T.3.E PVDF PTFE 4x6mm EPDM AC.LA.PV.PV.3.E PVDF PVDF 4x6mm EPDM AC.LA.3A PVC PVC 8x13mm Viton AC.LA.cP.3A cPVC PVC 8x13mm Viton AC.LA.cP.PV.3A cPVC PVDF 8x10mm Viton AC.LA.PV.PV.3A PVDF PVDF 8x10mm Viton AC.LA.3A.E PVC PVC 8x13mm EPDM AC.LA.cP.3A.E cPVC PVC 8x13mm EPDM AC.LA.cP.PV.3A.E cPVC PVDF 8x10mm EPDM AC.LA.PV.PV.3A.E PVDF PVDF 8x10mm EPDM
Please use our chemcial compatibiltiy checker to ensure that the wetted parts are compatible with your process. If you're unsure please don't hesitate to contact our friendly sales team.