BT25

25 Litre Bund Tank (27.5L Capacity)

25 litre bund tank model BT25 with 27.5 Litre Capacity

25 Litre Bund Tank manufactured in MDPE with 27.5 Litre capacity

25 Litre Bund Tank BT25 Introduction

The BT25 is a bund tank for use with our 25 Litre Dosing Tank  and can hold 110% of the capacity of the rated dosing tank, giving it a capacity of 27.5 litres. 

The 25 Litre Bund Tank model BT25 has dimensions of 580 W x 190 H x 450 D (mm) and is designed specifically for use in the water treatment, effluent treatment or process applications.

Manufactured in the UK using a single piece moulding, the DT25 is constructed from U.V. Stabilised MDPE (Medium Density PolyEthylene).

The BT25 provides a simple and cost effective way of providing spill containment to a 25 Litre Dosing Tank, ensuring compliance with current Health and Safety guidelines, enabling at least 27.5 litres of containment in the event that the chemical dosing tank has become compromised.

Stackable 25 Litre Bund Tank

For ease of storage requirements, the BT25 is manufactured with a tapered design to allow a number of bund tanks to be stacked together.

The folded over top of the bund tank is designed with fingers in mind, ensuring that a stack of bund tanks can be easily separated without jamming and being as easy on the fingers as possible.

The single piece construction and rolled over edge also increases the mechanical strength of the bund tank, ensuring it remains rigid, even when full.

Bund Tank Equipment Mounting

The BT25 is a relatively small chemical bund tank, designed for use with a chemical container with a capacity of 25 litres. When pairing the bund tank with a dosing fitted with a flooded suction kit, or foot mounted inlets / outlets, we recommend ensuring that there is enough space for all the mounted equipment.  If space is limited, we recommend using the bund tank which is one size larger, in this instance the 50 Litre bund tank BT50.

Dosing Tank for BT25

The BT25 is the companion bund for the DT25 dosing tank which is designed to stand inside the bund tank, allowing the top of the tank to be accessed easily.  The BT25 bund tank has a capacity of > 27.5 litres in total and is designed to offer compliance with Health & Safety legislation, and to provide containment in the event of the tank becoming compromised.

25 Litre Bund Tank Features & Benefits

The 25 Litre Bund Tank model BT25 is manufactured in the UK using moulding techniques to give single piece construction with no welds or seams, ensuring greater mechanical strength.

Designed specifically to provide spill containment to the DT25 Dosing Tank with 110% of the DT25's capacity, the BT25 can contain at least 27.5 Litres to satisfy current health and safety guidelines.

The BT25 is manufactured in chemically resistant MDPE, to ensure compatibility with a wide range of chemical reagents. Please don't hesitate to get in touch, if you wish to check the complicity of your reagents with MDPE.

In addition to the chemically resistant properties, the MDPE is also supplied to food grade standards and is U.V. stabilised to ensure no discolouration to the tank, even when stored outside.

BT25 Specifications

  • Specifications

    Specifications

    25 Litre Bund Tank

    Model No:- BT25

    Capacity:- Greater than 27.5 Litres

    Max. Operating Temperature:- 40°C

    Materials:- MDPE (Medium Density PolyEthylene)

    Standard Colours:- (U.V Stabilised) Natural

    Accuracy:- ±2% of stated sizes.

    Dimensions:- 560 W x 190 H x 450 D (mm)

  • Features

    Features

    • Designed to provide spill containment for 25 litre dosing tank DT25 offering 110% of the DT25's capacity. 
    • Manufactured in the UK using a one piece moulding process.
    • Designed to satisfy current health & safety legislation.
    • Designed specifically for use in water treatment, effluent treatment and process control applications. 
    • U.V stabilised MDPE to food grade standards.  
  • Data Sheets

    Data Sheets

Request Product Info
How your information will be used.

Using the details that you have provided, we will contact you specifically about the product or service that you have requested information on.

We will ask you if you would like to subscribe to our email newsletters which includes The Watermark and if you wish to receive a copy of our catalogue. You are under no obligation to do so and it won't affect us contacting you about a specific product or service if you choose not too.

If you do wish to subscribe to our email newsletter you can opt out at any point and the our full data policy can be found here.

More Information

Search