TM0

High Speed Mixer with 3" Propeller

high speed mixer 3 inch propellor 415 volt 3 phase motor TM0

TM0 High Speed Industrial Mixer, fitted with a 3 inch Ø marine style propeller with a 0.18kW 415 Volt 3 Phase Motor.


TM0 High Speed Mixer Introduction

The TM0 is a high speed industrial mixer designed for mixing and blending applications in process control, water treatment or effluent treatment applications, such as pH correction and powder mixing.

Fitted with a 3 inch or 75mm marine style propeller the TM0 creates a vortex within a liquid solution forcing the powders or liquids to mix. The TM0 operates at 1400 RPM and is powered from a 0.18kW 3 phase 415 VAC motor.

The direct drive mixer is suitable for mounting into vessels with a 200 Litre capacity such as our 200 Litre Dosing Tank or other similar vessels.


High Speed Mixer with 3 inch Propeller

The TM0 utilises a 3 inch propeller which forces the liquid into a vortex to provide continual mixing of liquids or powders.  The marine style propeller has a 3 petal arrangement providing a continuous spinning tip diameter of 3 inches and is manufactured in 316 stainless steel.

The 3 inch propeller is held in place with a shaft and coupling arrangement, also manufactured in 316 stainless steel.  The shaft is available, custom manufactured to length.

Our 3 inch propeller is designed to optimise the mixing capability by maximising the motor efficiency.  The effective mixing with the propeller is greater per horse power when compared with flat disc type mixers and other styles of propeller.


High Speed Mixer TM0 with 0.18kW 3 Phase Motor

The standard TM0 is fitted with a TEFC (Totally Enclosed Fan Cooled) direct drive motor and manufactured to IP55 specifications.  The standard motor is a 415 V three phase motor.  We also offer a 380 Volt motor, flameproof motor and on the TM0 model we offer a 240 VAC Single Phase Motor - the TM0-SP2.


Chemically Resistant High Speed Mixer TM0

For use with process chemicals, we offer the TM0 with the wetted parts (shaft and 3 inch propellor) coated in PVC.  This makes the mixer suitable for mixing applications where the chemical reacts with 316 Stainless Steel.

The shaft and mixer are coated as a single piece to ensure that any fastenings are resistant to the reagents being used in the process.

We strongly recommend when considering a chemically resistant high speed mixer, that the materials being used are compatible with PVC. 


TM0 High Speed Mixer Features & Benefits

The TM0 is a high speed mixer, designed for light to medium industrial duties.  Manufactured in house at our Stafford facility, the TM0 is available with a number of customisations, depending upon the duty required, including options for using: food grade lubricant, a 240 VAC single phase motor, a 3 phase 380 VAC motor, a flameproof motor, or with a chemically resistant coating. Please get in touch if you require any specific customisations for use with your process.

The 3 inch propellor offers efficient mixing and is designed for vessels approximately 200 Litres in capacity.  For vessels with variable liquid levels the TM0 can be integrated with our Liquid Level Control devices to prevent operation where a low level is present.

As a direct drive high speed mixer with a totally enclosed fan cooled motor, the TM0 is designed for continuous operation with minimal preventive maintenance, to offer efficient mixing of water treatment, effluent treatment, and process control applications.

TM0 High Speed Mixer Specifications

  • Specifications

    Specifications

    High Speed Industrial Mixer 1400 RPM

    Model Number:- TM0

    Frame Size:- D63

    Voltage:- 3 Phase 415 VAC

    Power:- 0.18kW or 0.25 HP

    Speed:- 1400 RPM

    Flange Diameter:- 140mm

    Hole Diameter:- 4 x 10mm

    PCD:- 115mm

    Plate Hole:- 97mm

    Propellor Diameter:- 75mm / 3 Inch

    Propellor Type:- 3 Blade Marine Style

    Suitable Volume:- 200 Litres

    Materials Of Construction:- 316 Stainless Steel (Optional PVC Coating)

  • Ordering Information

    Model NumberShaft LengthShaft / Propellor MaterialMotorPropellors
    TM0-XX XX = shaft length in mm 316 Stainless Steel 0.18kW 3 Phase 415 Volt AC  1 x 3 inch
    TM0-XX-EVA XX = shaft length in mm Plastic Coated 316 Stainless Steel 0.18kW 3 Phase 415 Volt AC  1 x 3 inch
    TM0-SP2-XX XX = shaft length in mm 316 Stainless Steel 0.18kW Single Phase 240 Volt AC 1 x 3 inch
    TM0-SP2-XX-EVA XX = shaft length in mm Plastic Coated 316 Stainless Steel 0.18kW Single Phase 240 Volt AC 1 x 3 inch

    PTFE coating is also available for use with concentrated chemical reagents - please speak with our friendly sales team for more information.

Request Product Info
How your information will be used.

Using the details that you have provided, we will contact you specifically about the product or service that you have requested information on.

We will ask you if you would like to subscribe to our email newsletters which includes The Watermark and if you wish to receive a copy of our catalogue. You are under no obligation to do so and it won't affect us contacting you about a specific product or service if you choose not too.

If you do wish to subscribe to our email newsletter you can opt out at any point and the our full data policy can be found here.

 

More Information

Related Items Industrial Mixers Small

Search