call now 01785 254 597

Dip pH electrode system for submersing into a tank or open container

 

Dip pH Electrode System

A dip pH electrode system or dip pH assembly is a superb way of measuring the pH in a process vessel; whether it's a bulk storage tank, pit, lagoon or other unpressurised vessel.

Our submersion pH electrode assemblies are designed so that they spend their entire operational duration, immersed within the solution to be measured. The exception being where they are removed for periodic buffering or calibration.

The P36-10B is a disposable immersion pH electrode system, measuring 900mm long with 3 metres of connecting cable. The pH electrode in this submersion assembly is not designed to be replaced. Alternatively our PS90S, PTT90S and PTT100S can be manufactured to any length up to 3 metres and have a replaceable pH electrode cartridge which screws in, to replace the existing pH electrode. The replacement pH electrode cartridges are fitted with over 6 metres of connecting cable.

The dip pH electrode systems are perfect for use in waste water treatment and process tanks. They are simple and cost effective devices which offer accurate pH readings and a quick response. They are often paired with a suitable pH controller allowing dosing pumps to be controlled to either correct the pH for discharge or maintain a pH level for process.

Dip pH electrode system and tanks with industrial mixers

Often a tank designed for waste water treatment or a process vessel will be fitted with an industrial mixer. These can either be high speed or geared mixers and both are suitable for use with a dip pH electrode system.

We would recommend mounting the submersion pH sensor assembly away from the mixer blades and also ensure that the submersed pH sensor remains continually submersed. pH electrodes do not like to get dry so the best place for them is to be constantly immersed in the solution being measured!

Dip pH Electrode systems


P36-10B

P36-10B

Immersion pH electrode assembly model P36-10B

A cost effective all in one disposable unit designed for immersion into open tanks, sumps, and other unpressurised vessels.

900mm long as standard with 3 metres of connecting cable and double junction pH electrode.

Features an annular non-fouling ceramic reference junction and rated for use from 0-60ºC

View Product


PS90S

PS90S

Dip pH probe assembly model PS90S

Manufactured in PVC and measuring 1000mm as standard with lengths of up to 3000mm available on request.

Perfect for continual pH measurement in open tanks, lagoons, pits, or other unpressurised vessels.

Comes complete with replaceable pH probe insert PS183-20B which offers excellent pH measurement thanks to the non-fouling annual reference junction.

Fitted with 6 metres of connecting cable and BNC - this pH probe is perfect for measuring the pH in process tanks

View Product


PTT90S

PTT90S

Dip pH electrode system with a heavy duty pH probe insert

The PTT90s is Manufactured in PVC and measures 1000mm as standard with lengths of up to 3000mm available on request.

Perfect for continual pH measurement in open tanks, lagoons, pits, or other unpressurised vessels which are under agitation from an industrial mixer.

The non-fouling magna tuff tip end is designed for heavy duty operation and the recessed pH bulb is virtually indestructible under normal operation.

Designed specifically where mechanical damage is a concern the PTT90S is supplied complete with a PTT183-20B pH probe insert

Fitted with 6 metres of connecting cable and BNC - this pH probe is perfect for measuring the pH in process tanks where a mixer is installed

View Product


PTT100S

PTT100S

Dip pH electrode system with built in automatic temperature compensation

The PTT90s is Manufactured in heavy duty PVDF and measures 1000mm as standard with lengths of up to 2000mm available on request.

Perfect for continual pH measurement in open tanks, lagoons, pits, or other unpressurised vessels which can be exposed to high temperature.

The non-fouling magna tuff tip end is designed for heavy duty operation, and the auto temperature compensation device is mounted at the same point as the pH is measured.

Our tuff tip end is recessed making it virtually indestructible under normal operation - which is particularly advantageous when mechanical damage is a concern.

The PTT100S is suppled complete with a PTT283-20B pH probe insert fitted with 6 metres of connecting cable and BNC / Tags.

This pH probe is perfect for measuring the pH in hot process tanks where a mixer is installed

View Product


ACS (Auto Clean System)

ACS (Auto Clean System)

The ACS (Auto Clean System) is designed to work with any of our dip pH probe assemblies.

The unit is simply mounted onto the side of the dip pH probe assembly and when connected to a suitable pH instrument allows the pH probe to be cleaned automatically.

The ACS is compatible as either a jet stream system for use with a cleaning liquid, or a compressed air auto clean system.

The autoclean system is designed predominantly for use where either greases or fats can accumulate, lime or other carbonates can form or fibres or stands are present.

By using the autoclean system the requirement for systematic manual maintenance on dip pH probe assemblies is significantly reduced.

View Product

Search