The Dip Conductivity Cell D2-01 is designed for continuous measurement of electrolytic conductivity within tanks, sumps, pits, lagoons and other vessels.

Dip Conductivity Cell D2-01 Introduction

The D2-01 dip conductivity cell is designed to measure the conductivity values of solutions within vented tanks, process vessels, tanks, sumps and pits.

The D2-01 comprises of a robust conductivity cell manufactured in cPVC, epoxy resin and carbon electrodes which are mounted into a uPVC riser tube for location into a tank or pit.

The Dip conductivity cell can be mounted into a tank using a pair of clips or alternatively the D2-01 can be mounted using an optional mounting flange to ensure that the conductivity cell is held into place.

In addition to measuring the conductivity, the D2-01 can be fitted with an optional temperature sensor for measuring temperature and providing automatic temperature compensation to a compatible instrument.

The D2-01 dip conductivity sensor assembly is supplied as standard measuring 600mm in length.  Where required, we can manufacture to custom lengths.  Please advise when ordering.

The D2-01 is suitable for use in temperatures up to 50ºC.

The D2-01 has a cell constant of K=0.1 which is designed to measure conductiviy ranges up to a value of 0 - 2.0mS (2000µS)

The D2-01 conductivity cell has a detachable connector fitted to the cell head for easy servicing and calibration as standard.  We also offer fitted cell heads for laboratory or portable instruments, as required.

When fitted with a removable head connector. this has easily accessable connections for a two wire device for conductivity only, or for a 4 wire device for conductivity with temperature compensation.

We strongly recommend pairing a 2 wire device with our specifically shielded conductivity connecting cable, model LMK2, and with the 4 wire device, with our conductivity connecting cable with ATC model LMK4.

D2-01 Automatic Temperature Compensation

The dip conductivty cell D2-01 is available with automatic temperature compensation to suit a number of different conductivity controllers or conductivity transmitters. Please specify when ordering the name and manufacture of the conductivity instrument so we can ensure compatibility with the automatic temperature compensation.

D2-01 Dip Conductivity Cell Features & Benefits

The D2-01 is supplied as a complete unit made to any length from 300mm to 2000mm; ready for simple and permanent installation into a process vessel either clipped into place or alternatively request our optional mounting flange.

Easy to use with minimal maintenance required the D2-01 is suitable for conductivity applications with lower conductivity values (less than 2000µS), and with the automatic temperature compensation. Fluctuations in temperature are accurately compensated for, using a compatible instrument.

The D2-01 is often found in purity control for electroplating rinses and in recirculating cooling water control.

As a reliable and accurate conductivity cell, the D2-01 is a often paired with our C7635 conductivity controller.

The Dip Conductivity Cell D2-10 is designed for continuous measurement of electrolytic conductivity within tanks, sumps, pits, lagoons and other vessels.

Dip Conductivity Cell D2-10 Introduction

The D2-10 comprises of a robust conductivity cell, manufactured in cPVC; epoxy resin and carbon electrodes which are mounted into a uPVC riser tube for location into a tank or pit.

Normally mounted into process vessels, the Dip conductivity cell can be mounted into a tank using a pair of clips or alternatively the D2-10 can be mounted using an optional mounting flange to ensure that the conductivity cell is held into place.

The D2-10 can be supplied with an integral temperature measuring device to provide automatic temperature compensation.  The maximum operating temperature of the D2-10 is 50°C.

The D2-10 Dip conductivity sensor assembly is supplied as standard measuring 600mm in length, and can be manufactured to custom lengths as required.

The cell constant of the D2-10 is K=1.0 which is designed to measure conductivity ranges up to a value of 0 - 100.0mS

The D2-10 conductivity cell has a detachable connector fitted to the cell head for easy servicing and calibration as standard.  We can also offer fitted cell heads for laboratory or portable instruments.

When fitted with a removable head connector this has easy to access connections with a two wire device for conductivity only, or with a 4 wire device for conductivity with temperature compensation.

We strongly recommend pairing a 2 wire device with our specifically shielded conductivity connecting cable, model LMK2, and a 4 wire device with our conductivity connecting cable with ATC model LMK4.

D2-10 Automatic Temperature Compensation

The Dip conductivity cell D2-10 is available with automatic temperature compensation to suit a number of different conductivity controllers or conductivity transmitters. Please specify when ordering, the name and manufacturer of the conductivity instrument so that we can ensure compatibility with the automatic temperature compensation.

D2-10 Dip Conductivity Cell Features & Benefits

The D2-10 is supplied as a complete assembled unit made to any length from 300mm to 2000mm; ready for simple and permanent installation into a process vessel, either clipped into place or alternatively, please request our optional mounting flange.

A simple to use conductivity probe, the D2-10 is suitable for most general conductivity applications, where the conductivity is below 100mS. They are often found in rinse water control applications; solution strength control of pickling liquors and in detergent strength control for CIP applications in the food & brewing industries. When combined with the automatic temperature compensation, elevated temperatures in pickling baths and CIP applications are actively compensated for when using a compatible instrument.

As a reliable and accurate conductivity cell, the D2-10 is a often paired with our C3645 conductivity controller.

The high temperature Dip Conductivity cell D1-10 is designed for the continuous measurement of electrolytic conductivity within tanks, sumps, pits, lagoons and other vessels.

High Temperature Conductivity Cell D1-10 Introduction

The D1-10 conductivity cells are precision manufactured to offer high linearity cells which give very accurate cell constants. The conductivity cells comprise of 3 precision machined graphite electrodes mounted within an epoxy body.

The conductivity cells are constructed from PVDF (Kynar), and epoxy resin with carbon electrodes. They are mounted within a riser tube manufactured in cPVC, PVDF (Kynar) or Stainless Steel for greater chemical and thermal resistance. The riser tube is supplied as standard, measuring 600mm in length, and can be manufactured up to a length of 2 metres.

The available operating temperatures are as follows:-

• Manufactured in cPVC is suitable for a temperature of up to 85ºC.
• Manufactured in PVDF or 316 Stainless  Steel is suitable for a temperature of 100ºC.

The D1-10 has a cell constant of K=1.0 which is designed to measure conductivities up to a range of 0 - 100.0mS.

The D1-10 is normally held into the process using retaining clips and optional mounting flanges in PVC (as pictured), or PolyPropylene is also available.

The D1-10 conductivity cell has a detachable connector fitted to the cell head for easy servicing and calibration as standard.  In addition, we are able to offer fitted cell heads for laboratory or portable instruments.

When fitted with a removable head connector, this has easy to access connections for a two wire device for conductivity only, or a 4 wire device for conductivity with temperature compensation.

We strongly recommend pairing a 2 wire device with our specifically shielded conductivity connecting cable LMK2 and a 4 wire device with our conductivity connecting cable with ATC, model LMK4.

D1-10 Automatic Temperature Compensation

The high temperature conductivity Dip cell D1-10 is available with automatic temperature compensation to suit a number of different conductivity controllers or conductivity transmitters. Please specify when ordering the name and manufacture of the conductivity instrument so we can ensure compatibility with the automatic temperature compensation.

D1-10 Dip Conductivity Cell Features & Benefits

The D1-10 is supplied as a complete unit, made to any length from 300mm to 2000mm; ready for simple and permanent installation into a process vessel. It can either be clipped into place or we offer an optional mounting flange.

With a high linearity conductivity cell the D1-10 offers exceptionally accurate conductivity readings and with a high temperature riser tube, the D1-10 is suitable for use at temperatures up to 100ºC.

Easy to use with minimal maintenance required, the D1-10 is suitable for most conductivity applications, and with the automatic temperature compensation, even hot processes can be accurately monitored and controlled.

The D1-10 is often found used in the control of heated rinse waters, and in CIP solution strength control processes.  It is also suitable for use in dairies and brewing applications.

As a reliable and accurate conductivity cell, the D1-10 is a often paired with our C7635 conductivity controller.

The high temperature Dip conductivity cell D1-100 is designed for the continuous measurement of electrolytic conductivity within tanks, sumps, pits, lagoons and other vessels.

High Temperature Conductivity Cell D1-100 Introduction

The D1-100 conductivity cells are precision manufactured to offer high linearity cells offering very accurate cell constants. The conductivity cells comprise of 3 precision machined graphite electrodes mounted within an epoxy body.

The conductivity cells are constructed from PVDF (Kynar), and epoxy resin with carbon electrodes. They are mounted within a riser tube manufactured in cPVC, PVDF (Kynar) or Stainless Steel for greater chemical and thermal resistance. The riser tube is supplied as standard measuring 600mm in length, and can be manufactured up to a length of 2 metres.

The available operating temperatures are as follows:-

• Manufactured in cPVC is suitable for a temperature of up to 85ºC.
• Manufactured in PVDF or 316 Stainless  Steel is suitable for a temperature of 100°C.

The D1-100 has a cell constant of K=10.0 which is designed to give greater accuracy when measuring higher conductivities, up to a range of 0 - 1000mS.

The D1-100 is normally held into the process using retaining clips.  There is an optional mounting flange available, in either PVC (as pictured) or PolyPropylene.

The D1-100 conductivity cell has a detachable connector fitted to the cell head for easy servicing and calibration as standard.  We can also offer fitted cell heads for laboratory or portable instruments.

When fitted with a removable head connector this has easy to access connections for a two wire device for conductivity only or a 4 wire device for conductivity with temperature compensation.

We strongly recommend pairing a 2 wire device with our specifically shielded conductivity connecting cable LMK2 and a 4 wire device with our conductivity connecting cable with ATC model LMK4.

D1-100 Automatic Temperature Compensation

The high temperature conductivity dip cell D1-100 is available with automatic temperature compensation to suit a number of different conductivity controllers or conductivity transmitters. Please specify when ordering the name and manufacturer of the conductivity instrument so we can ensure compatibility with the automatic temperature compensation.

D1-100 Dip Conductivity Cell Features & Benefits

The D1-100 is supplied as a complete unit, made to any length from 300mm to 2000mm; ready for simple and permanent installation into a process vessel, either clipped into place or using an optional supplied mounting flange.

With a high linearity conductivity cell the D1-100 can accurately measure higher conductivities with exceptionally accuracy.  Where a high temperature riser tube is fitted, the D1-100 is suitable for use at temperatures up to 100ºC.

Easy to use with minimal maintenance required, the D1-100 is suitable for conductivity applications where a higher range of conductivty is present.  With the automatic temperature compensation, even hot processes can be accurately monitored and controlled.

The D1-100 is often found used in the control of alkali degreasing applications, industrial solution strength control applications, and the control of CIP solutions in the food & beverage industries.

As a reliable and accurate conductivity cell, the D1-100 is a often paired with our C7635 conductivity controller.