SUR-457-2

SUR-457-2 Temperature Controller

The SUR-457 meter is equipped with one universal input, type: 0/4-20 mA, 0-10V, 0-150 mV, Pt 100/500/1000 or TC (K, S, J, T, N, R, B, E). During the measurement process only one kind of input is available. As a main advantage, this device is equipped with a large, 57 mm high display offering ultra bright red, green and blue as well as multicolour LED's. Thanks to the tight housing with high (IP 67) protection degree, this device is particularly suitable for operations in harsh environments.

Due to wide range of characteristic curves (linear, square root, quadratic, user-defined and volume characteristic for cylindrical tanks) the meters may be used in various process control systems. The 24V DC / 100 mA output is designed to supply measuring transducers, and the RS-485 port enables data transmission in production process monitoring systems. The REL / OC control outputs can adjust the level of measured signal and are controlled according to one or two threshold values.

Moreover, the meter can be equipped with analogue outputs, according to the customer selection: active current output, passive isolated current output or active voltage output. The meter may be configured with no need to open the case, by either using the remote controller or with Software via the RS-485 communication port.

Key Features

Universal meter in tight, wall mounting case, IP 67
Multicolour or ultra bright red, green and blue, 57 mm LED display
Universal input: 0/4-20 mA, 0-10V, 0-150 mV, RTD or TC
Binary outputs REL / OC
Analogue output: active or passive, power supply output: 24V DC
RS-485 / Modbus RTU
Signal peak value detection
Free configuration software

SUR-467-2 Temperature Controller Specifications

Specifications

Number of inputs: 1

Input Type: Universal

Input range: 4...20 mA, 0...60 mV, 0...75 mV, 0...100 mV, 0...150 mV, 0/1...5V, 0/2...10V, 0...300Ω, 0...3kΩ

Pt100, Pt500, Pt1000: -100...+600°C,

TC K: -200...+1370°C, S: -50...+1768°C, J: -210...+1200°C, T: -200...+400°C, N: -200...+1300°C, R: -50...+1768°C, B: +250...+1820°C, E: -200...+1000°C

Output type: Depends on configuration: relay I=1A, U=30V DC/250V AC (cosø=1) Open Collector: I=30 mA, U=30V DC, P=100 mW 0/4...20 mA: active current, operating range 0...24 mA max., load resistance 700 Ω max., resolution 13 bit 4...20 mA: passive current, isolated, operating range 2,8...24 mA max., load resistance 600 Ω@24VDC, resolution 13 bit 0/1...5V, 0/2...10V: active voltage, operating range 0...11V max., load resistance min. 2000 Ω, resolution 13 bit.

Power Supply: 16...35V AC, 19...50V DC, 85..260V AC/DC.

Display: LED, 4 x 57 mm, multicolour, LED, 4 x 57 mm, ultra bright (red, green, blue)

Communication Interface: RS-485 / Modbus RTU

Transmission Parameters: 1200...115200 bit/s, 8N1 / 8N2

Operating Temperature: 0...+50°C, -20…+50°C

Protection Class: IP 67

Case Material: ABS, polycarbonate

Mounting: Wall

Case Dimensions: 230 x 140 x 96,5 mm
Features

Universal meter in tight, wall mounting case, IP 67

Multicolour or ultra bright red, green and blue, 57 mm LED display

Universal input: 0/4-20 mA, 0-10V, 0-150 mV, RTD or TC

Binary outputs REL / OC

Analogue output: active or passive, power supply output: 24V DC

RS-485 / Modbus RTU

Signal peak value detection

Free configuration software
Data Sheets

ATC-N118

ATC-N118 Temperature Controller

The ATC-N118 meter is designed for temperature measurements. The device is equipped with one resistance-type Pt100/500/1000 input or thermocouple input which can operate with K, S, J, T, N, R, B, and E type thermocouples. The inputs feature with fully linearized characteristics.

Thanks to the tight housing with high (IP 67) protection degree, this device is particularly suitable for operations in harsh environments. The 24V DC / 100 mA output is designed to supply measuring transducers, and the RS-485 port enables data transmission in production process monitoring systems. The REL / OC control outputs can adjust the level of measured signal and are controlled according to one or two threshold values.

Moreover, the meter can be equipped with analogue outputs, according to the customer selection: active current output, passive isolated current output or active voltage output. The meter may be configured with no need to open the case, by using the remote controller or with free S-Config software via the RS-485 communication port.

Key Features

Temperature meter in wall-mounted IP 67 case
Input: thermoresistance or thermocouple
0 or 2 REL / OC outputs
Analogue output: active or passive, power supply output: 24V DC
RS-485 / Modbus RTU
Automatic recognition of 3 and 4-conductor connection (RTD inputs)
Automatic compensation of TC cold ends temperature
Signal peak value detection
Free configuration software S-Config

ATC-N118 Temperature Controller Specifications

Specifications

Number of inputs: 1

Input type: RTD, TC, voltage (mV)

Input range: Pt100, Pt500, Pt1000: -100...+600°C, TC K: -200...+1370°C, S: -50...+1768°C, J: -210...+1200°C, T: -200...+400°C, N: -200...+1300°C, R: -50...+1768°C, B: +250...+1820°C, E: -200...+1000°C -10...90mV

Output type: Depends on configuration: relay I=1A, U=30V DC/250V AC (cosø=1), Open Collector: I=30 mA, U=30V DC, P=100 mW 0/4...20 mA: active current, operating range 0...24 mA max., load resistance 700 Ω max., resolution 13 bit 4...20 mA: passive current, isolated, operating range 2,8...24 mA max., load resistance 600 Ω@24VDC, resolution 13 bit 0/1...5V, 0/2...10V: active voltage, operating range 0...11V max., load resistance min. 2000 Ω, resolution 13 bit

Power supply: 16...35V AC, 19...50V DC 85..260V AC/DC

Display: LED, 4 x 20 mm, red LED, 4 x 20 mm, green

Communication Interface: RS-485 / Modbus RTU

Transmission Parameters: 1200...115200 bit/s, 8N1 / 8N2

Operating Temperature: 0...+50°C, -20…+50°C

Protection Class: IP 67

Case Material: ABS, polycarbonate

Mounting: Panel

Case Dimensions: 110 x 80 x 67 mm
Applications

Temperature meter in wall-mounted IP 67 case

Analogue output: active or passive, power supply output: 24V DC

RS-485 / Modbus RTU

Automatic recognition of 3 and 4-conductor connection (RTD inputs)

Automatic compensation of TC cold ends temperature

Signal peak value detection
Data Sheets

ATC-73-2

ATC-73-2 Temperature Controller

The ATC-73-2 Temperature Controller is designed for temperature measurements. The device is equipped with one resistance-type Pt100/500/1000 input or thermocouple input which can operate with K, S, J, T, N, R, B, and E type thermocouples. The inputs feature with fully linearized characteristics.

The device with thermocouple input has additional measurement range (-10 ÷ 90 mV) mainly for diagnostics of measurement circuits. The 24V DC / 100 mA output is designed to supply measuring transducers, and the RS-485 port enables data transmission in production process monitoring systems. The REL / OC control outputs can adjust the level of measured signal and are controlled according to one or two threshold values. The meter can be configured with the local keyboard or software via the RS-485 communication port.

Key Features

Temperature meter in a small case
Two-coloured display (4-digits, IP 40)
Input: thermoresistance or thermocouple
0, 1 or 2 REL / OC outputs
RS-485 / Modbus RTU
Automatic recognition of 3 and 4-conductor connection (RTD inputs)
Automatic compensation of TC cold ends temperature
Free configuration software S-Config

ATC-73-2 Temperature Controller Specifications

Specifications

Number of Inputs: 1

Input Type: RTD, TC, voltage (mV)

Input Range: Pt100, Pt500, Pt1000: -100...+600°C TC K: -200...+1370°C, S: -50...+1768°C, J: -210...+1200°C, T: -200...+400°C, N: -200...+1300°C, R: -50...+1768°C, B: +250...+1820°C, E: -200...+1000°C -10...90mV

Output Ttype: Open Collector: I=30 mA, U=30V DC, P=100 mW relay I=1A, U=30V DC/250V AC (cosø=1)

Power supply: 16...35V AC, 19...50V DC 85..260V AC/DC

Display: LED, 4 x 13 mm, two-coloured LED, 5 x 9 mm, red

Communication Interface: RS-485 / Modbus RTU

Transmission Parameters: 1200...115200 bit/s, 8N1 / 8N2

Operating Temperature: 0...+50°C, -20…+50°C

Protection Class: IP 20 (case and connection clips), IP 40 (front), IP 65 (front), optional integrated frame for panel cut-out sealing.

Case Material: NORYL-GFN2S E1

Mounting: panel

Case Dimensions: 72 x 36 x 97 mm
Applications

Process meter in a small case

2 display types: 4 x 13 mm or 5 x 9 mm

Inputs: 0/4-20 mA, 0/1-5V, 0/2-10V, 0-60/75/100/150 mV

RS-485 / Modbus RTU

0, 1 or 2 relay (or OC) outputs

Power supply output: 24V DC
Data Sheets

Temperature Controller

A temperature controller is a device designed to offer automatic control of a process based on the measured temperature value.

Each of the temperature controllers amplifies the incoming signal from a resistance temperature device (RTD) such as a PT100 or PT1000 platinum resistance thermometer (PRT).

The temperature is displayed on the screen of each of the temperature controllers allowing the user to visually identify the measured temperature.

Temperature Control Options

With the accurately measured temperature displayed on the screen the temperature controllers offer a number of different control options.

Each of the temperature controllers has a control relay. This is in an electrical contact which allows process devices to be switched on or off. This is commonly used to control heaters, chillers, as well as open or close control valves.

On effluent discharge monitoring systems the temperature controllers have been used open a control valve, allowing process effluent which is hotter than an agreed consent to discharge agreement to be recirculated. This allows the effluent to cool below the permitted temperature outlined in a consent to discharge agreement before being discharged.

Many of the controllers have 2 x control relays and the TR7615 has 2 x control relays and an alarm relay. This allows them to control numerous processes and are frequently used in process control applications in a number of manufacturing processes.

Temperature Controller with 4-20mA Output

In addition - to a control relay and associated set-point, many of the temperature controllers include a 4-20mA output.

This is an industry standard current signal which is proportional to the range of the instrument. So if an instrument has a range of 0 - 100°C and the measured value is 50°C - the 4-20mA signal would be 12.00mA.

In addition to temperature controllers with a 4-20mA, we also offer a stand alone 4-20mA temperature transmitter the TT100. This is designed to be mounted inside the head of a temperature sensor and transmit a 4-20mA signal directly from the temperature sensor itself.

Temperature Controller Range

TT100

The TT100 is a 4-20mA temperature transmitter - so not technically a temperature controller at all!

Designed to sit inside the head of temperature sensor, the TT100 takes the incoming signal from a PT100 PRT and outputs a 4-20mA corresponding the measured temperature. Ideal for use with 4-20mA controllers and PLC's.

The TT100 is available with a measuring range of 0 - 50°C, 0 - 100°C, 0 - 200°C, or -10°C to 100°C.

View Product

TR3645

The TR3645-W is a surface mounting temperature controller with a range of - 20.0°C to 120 °C and is suitable for use with a 3 - wire PRT including a PT100 or a PT1000.

The TR3645 has a user adjustable set-point and associated control relay, and can provide a 4-20mA output.

Ideal for use in process control applications where the control relay can be used to active or deactivate process control equipment, and the 4-20mA is ideal for relaying the temperature signal back to a data logger or BMS (building management system).

View Product

TR7615

Panel mount temperature controller TR7615 is a sophisticated and easy to use precision temperature controller with a range of 0.00°C to + 199.9°C.

Designed to work with a PRT device such as a PT100 or a PT1000 to offer precision temperature measurement and control.

Fitted with 2 x independent and user adjustable set-points complete with associated control relays. The TR7615 also includes an isolated 4-20mA output and a control relay which is ideal for triggering alarms systems such as beacons and buzzers.

View Product

K39T

The K39T is a temperature controller designed for panel mounting with sophisticated control functionality.

The K39T is suitable for use with either a 3 wire RTD such as a PT100 or PT1000, and can also be used with a thermocouple or thermistor.

Designed for controlling temperature processes the K39T includes 2 x control relays with associated set-points and has a range of - 200°C to + 850°C.

View Product

ATC-73-2

The ATC-73-2 Temperature Controller is designed for temperature measurements.

The device is equipped with one resistance-type Pt100/500/1000 input or thermocouple input which can operate with K, S, J, T, N, R, B, and E type thermocouples. The inputs feature with fully linearized characteristics.

View Product

ATC-N118

The ATC-N118 meter is designed for temperature measurements.

The device is equipped with one resistance-type Pt100/500/1000 input or thermocouple input which can operate with K, S, J, T, N, R, B, and E type thermocouples. The inputs feature with fully linearized characteristics.

View Product

SUR-457-2

The SUR-457-2 meter is designed for temperature measurements.

The SUR-457 meter is equipped with one universal input, type 0/4-20 mA, 0-10V, 0-150 mV, Pt 100/500/1000 or TC (K, S, J, T, N, R, B, E).

View Product

TR3645-W

Surface Mounting Temperature Controller

Surace mounting temperature controller TR3645-W

Surface Mounting Temperature Controller

The Model TR3645-W Temperature Controller is designed to be easy to use; accurate; provide control options for simple control applications and a 4-20mA output signal for integration with industrial control options.

The TR3645-W is designed to pair with a 3 Wire PT100 Temperature Sensor to give a measuring and controlling range between - 20°C to + 120°C.

The TR3645 is available as a Din rail mounted unit for mounting in a control panel, or as the TR3645-W in a surface mounting enclosure.

Designed with the operator in mind, the TR3645-W is easy to use and has a large easy to read LCD (liquid crystal display) displaying the measured temperature in °C.

The TR3645-W can be powered from either 115 VAC or 230 VAC 50 / 60Hz.

Temperature Controller TR3645 Dimensions

When the TR3645 is provided in din rail mounting configuration it measures just 105 mm wide x 100 mm high x 58 mm deep. When supplied in the surface mounting enclosure the unit measures 135 mm wide x 170 mm high and 115mm deep.

When in surface mounting configuration the conductivity controller has a clear door for easy access to the simple to use controls, allowing the operator to calibrate the instrument or set the two set points from the front panel.

The values of the set-point is easy to determine using the front mounted potentiometers. By selecting a value at which the set-point should operate and either high or low level operation to engage the set-point. The system has a set-point LED to illustrate the relay state and for checking the relays during setup or commissioning.

Temperature Controller TR3645-W Setpoint with On/Off Control Relay

The TR3645-W has an easy to programme On/Off control setpoint with an adjustable time delay of up to 40 seconds before the relay operates. The relay co-operation can be selected for either High or Low operation via a control switch.

When the setpoint is configured for use under low operation, then when the monitored temperature value is lower than the setpoint value, the LED is lit and the corresponding relay is activated. If the relay has the delay function activated then the timer will be called until the relay is activated.

For use under high operation, then when the monitored temperature value is higher than the setpoint, the LED is lit and the corresponding relay is activated. Again, if a delay has been assigned to the relay then the relay will wait until this delay has expired, before activating the relay.

As the TR3645-W is an easy to use temperature controller with excellent control options, it makes an excellent choice of cost effective temperature controller for many processes, including simple engagement and disengagement of a heater, alarm circuitry or for integration into larger systems where temperature is measured or controlled.

TR3645-W easy to use Conductivity Controller with 4-20mA Output

The TR3645-W surface mounting temperature controller has an industry standard 4-20mA output. This 4-20mA output can be used with a variety of control equipment, including PLC's and Chart Recorders. The 4-20mA output in this instrument is non-expandable, meaning that it corresponds precisely to the measured range of the instrument selected.

TR3645-W Controller Specifications

Specifications

Model No:- TR3645-W

Temperature Range:- -20°C to +120°C

Supported Temperature Sensor:- PT100 (3 Wire PRT)

Set Points:- 1 on / off, high / low selectable, 5 Amp 220 VAC resistive load

Action:- On/Off over 100% of range

Hysteresis:- ± 0.4%

Switching Time:- <0.5 s

Time Delay:- 0 - 40 seconds adjustable

Current output:- 0 - 20/ 4 - 20mA

Zero:- ±10%

Slope:- ±20%

Ambient Temperature:- 0 - 50°C

Mains Supply:-220 Volt / 110 Volt, 50 / 60Hz

Weight:- 265 grams DIN version

Dimensions:- 100 x 95 x 58mm
Features

Easy to use precision surface mounted temperature controller with set point for on / off control, complete with delay timer.

Works with any of our range of precision platinum resistance thermometer PT100 temperature sensors.

Din rail mounting or surface mounting in a compact enclosure with makalon access door.

Easy calibration procedure even for untrained operators with adjustment of Zero and Span via front mounted potentiometers.

Clear crisp display so the temperature value, set-point setup and calibration procedure can be easily checked and adjusted as required.

4-20mA output for easy integration with a digital chart recorder, PLC or online data logger
Data Sheets

Automated Water & Effluent Ltd.

Waste-Water pH Neutralisation System

SUR-457-2

SUR-457-2 Temperature Controller

Key Features

Specifications

Features

Data Sheets

ATC-N118

ATC-N118 Temperature Controller

Key Features

ATC-N118 Temperature Controller Specifications

Specifications

Applications

Data Sheets

ATC-73-2

ATC-73-2 Temperature Controller

Key Features

ATC-73-2 Temperature Controller Specifications

Specifications

Applications

Data Sheets

Temperature Controller

Temperature Control Options

Temperature Controller with 4-20mA Output

Temperature Controller Range

TR3645-W

Surface Mounting Temperature Controller

Surface Mounting Temperature Controller

Temperature Controller TR3645 Dimensions

Temperature Controller TR3645-W Setpoint with On/Off Control Relay

TR3645-W easy to use Conductivity Controller with 4-20mA Output

TR3645-W Controller Specifications

Specifications

Features

Data Sheets

More Articles ...

Double Confinement for Chemical Dosing

The P3436 pH Transmitter

pH Scale

Chemical Compatibility Checker

Search