call now 01785 254 597

 

Dosing Tank

We offer a full chemical dosing tank range with each dosing tank blow moulded in virgin MDPE to food grade standards, with the manufacturing taking place right here in the U.K.

Designed specifically for use in the water treatment, effluent treatment and process control sectors - the chemically resistant MDPE tanks can be manufactured in UV stabilised black for use with chemicals with a low vapour pressure, allowing us to supply dosing tanks suitable for Sodium Hypochlorite and dosing tanks suitable for Hydrogen Peroxide.

Alternatively we manufacture our dosing tank range in natural MDPE for use with chemicals where UV stabilisation isn't an issue or where the tanks aren't subjected to UV radiation.

Dosing Tank Mounted Equipment

Our cylindrical dosing tanks include a flat raised section shelf section which can be used to mount equipment on top of the tank. This is ideal for mounting items such as dosing pumps, industrial mixers, and instrumentation. Where required we can fit the dosing tank with a strengthening plate when a combination of equipment is used or where weight is a concern.

Dosing Tank With Screw Fitting Lid and Graduated Scale

In addition to the elevated flat mounting section - the dosing tank has a black screw fitting lid which can be tightening down on top of the tank.

The male threaded fitting that the lid screws down onto is moulded into the MDPE allowing the lid to create a tight seal with the dosing tank.

Also when manufacturing the tank a raised graduated scale is incorporated into the design of the tank and coloured black. With the natural MDPE dosing tanks this allows the MDPE dosing tanks to allow a quick visual indication to check the level of reagent located within the tank.

Dosing Tanks for process applications

Each of our dosing tanks can be supplied ready for use in process applications. We can fit all manner of equipment to the tanks either for stand alone applications - such as industrial mixers for keeping lime solutions in suspension for pH neutralisation, or we can ensure that the tanks are suitable for integration into a larger process, by adding liquid level electrodes, dosing pumps and supply the dosing tanks complete with pipework, flanges, and valves to integrate into an existing process or new process.

Dosing Tank Range


DT25

DT25

The DT25 is a 25 Litre Dosing Tank manufactured in chemically resistant MDPE and available in either black for UV stabilisation or natural MDPE. 

Manufactured with a front mounted graduated scale for easy visual identification of liquid level and black screw top cap for securing liquid contents. 

The DT25 has a capacity of 25 litres and is rectangular in shape with dimensions 250 W x 350 H x 340 D (mm).

View Product


DT50

DT50

The DT50 is a 50 Litre Dosing Tank manufactured in chemically resistant MDPE and available in either black for UV stabilisation or natural MDPE. 

Manufactured with a front mounted graduated scale for easy visual identification of liquid level and black screw top cap for securing liquid contents. 

The DT50 has a capacity of 50 litres and is cylindrical in shape with dimensions of 425 Dia x 500 H (mm).

The DT50 has a flat raised section for the mounting of equipment.

View Product


DT100

DT100

The DT100 is a 100 Litre Dosing Tank manufactured in chemically resistant MDPE and available in either black for UV stabilisation or natural MDPE. 

Manufactured with a front mounted graduated scale for easy visual identification of liquid level and black screw top cap for securing liquid contents. 

The DT100 has a capacity of 100 litres and is cylindrical in shape with dimensions of 495 Dia x 700 H (mm).

The DT100 has a flat raised section for the mounting of equipment.

View Product


DT200

DT200

The DT200 is a 200 Litre Dosing Tank manufactured in chemically resistant MDPE and available in either black for UV stabilisation or natural MDPE. 

Manufactured with a front mounted graduated scale for easy visual identification of liquid level and black screw top cap for securing liquid contents. 

The DT200 has a capacity of 200 litres and is cylindrical in shape with dimensions of 635 Dia x 765 H (mm).

The DT200 has a flat raised section for the mounting of equipment.

View Product


DT300

DT300

The DT300 is a 300 Litre Dosing Tank manufactured in chemically resistant MDPE and available in either black for UV stabilisation or natural MDPE. 

Manufactured with a front mounted graduated scale for easy visual identification of liquid level and black screw top cap for securing liquid contents. 

The DT300 has a capacity of 300 litres and is cylindrical in shape with dimensions of 660 Dia x 1075 H (mm).

The DT300 has a flat raised section for the mounting of equipment.

View Product


DT500

DT500

The DT500 is a 500 Litre Dosing Tank manufactured in chemically resistant MDPE and available in either black for UV stabilisation or natural MDPE. 

Manufactured with a front mounted graduated scale for easy visual identification of liquid level and black screw top cap for securing liquid contents. 

The DT500 has a capacity of 500 litres and is cylindrical in shape with dimensions of 815 Dia x 1100 H (mm).

The DT500 has a flat raised section for the mounting of equipment and a large opening measuring 270mm in diameter. 

View Product


DT1000

DT1000

The DT1000 is a 1000 Litre Dosing Tank manufactured in chemically resistant MDPE and available in either black for UV stabilisation or natural MDPE. 

Manufactured with a front mounted graduated scale for easy visual identification of liquid level and black screw top cap for securing liquid contents. 

The DT1000 has a capacity of 1000 litres and is cylindrical in shape with dimensions of 1065 Dia x 1355 H (mm).

The DT1000 has a flat raised section for the mounting of equipment and a large opening measuring 270mm in diameter. 

View Product

DT50

50 Litre Dosing Tank

50 litre dosing tank model DT50

50 Litre Dosing Tank manufactured in food grade MDPE


50 Litre Dosing Tank DT50 Introduction

The DT50 is a dosing tank with a capacity of 50 litres, designed specifically for use in water treatment, effluent treatment or process applications, with dimensions of 425 Ø x 500 H (mm).

The 50 Litre Dosing Tank is manufactured from food grade and U.V stabilised MDPE (Medium Density PolyEthylene), which is rotatory moulded in the UK, to give a single piece construction chemical dosing tank.

The DT50 provides a simple and cost effective way of storing up 50 litres of chemical which can then be transferred into a process using a Dosing Pump or other equipment, as required.

The 50 Litre dosing tank has a graduated scale on the front of the tank which is colour contrasted on our natural coloured tanks.  This allows the user to visually inspect the contents of the tank, at a glance.

In addition to natural colour, the 50 Litre Dosing Tank is available in a range of colours including: black for use with liquids with a low vapour pressure, such as Sodium Hypochlorite or Hydrogen Peroxide, as well as Red or Blue to denote acid or alkali contents respectively.


Screw Top Lid

The DT50 Dosing Tank is moulded as a single piece construction, with the threaded section moulded at the point of manufacture.  This means that our 50 Litre Dosing Tank has no seams or welds.  The single piece construction increases the mechanical strength of the dosing tank and as there are no weak points in the tanks construction, it reduces the risk of the tank becoming compromised, during normal operation.

As the thread is integral to the construction of the tank, there are no screws holding the threaded section into place, which ensures a completely corrosion free storage environment.

Supplied complete with the tank is a black screw fitting lid with dimensions of 190mm Ø, to keep the contents of the 50 Litre Dosing Tank securely locked away, when not in use.  The aperture of the tank opening is 130mm Ø.


DT50 Equipment Mounting

The DT50 is manufactured with a raised flat shelf which is designed so that equipment can be mounted on top of the tank.

Due to the robust construction of the tank and flat top, we are able to offer the DT50 fitted with monitoring sensors from our range including Industrial Mixers, dip pH, Redox, or Conductivity assemblies as well as Liquid Level Sensor Assemblies to allow the automated switching of control equipment.

Where more than one item is mounted onto the tank or where the equipment is heavy, we're able to fit a tank top strengthening plate model to the dosing tanks.


Modifications

As the 50 Litre Dosing Tank can be used as a 50 Litre process vessel, we can supply the DT50 complete with fittings or with other modifications, to suit your application.

We can fit solenoid valves, actuated valves (manually, pneumatically or electrically actuated), as well as inlets, outlets and other general pipework and fittings, depending upon your requirements.


Bund Tank for DT50

The DT50 can be supplied complete with an associated bund tank to ensure compliance with Health & Safety legislation and to provide containment in the event of the tank becoming compromised.

The companion bund for the DT50 Dosing Tank is the BT50 Bund Tank, which allows the tank to be stood in the bund tank and for the top of the tank to be easily accessible.  The BT50 has a total capacity of < 55 Litres.


50 Litre Dosing Tank Features & Benefits

The 50 Litre Dosing Tank model DT50 is manufactured in the UK using moulding techniques to give single piece construction, with no welds or seams, ensuring greater mechanical strength.

The MDPE is U.V. stabilised, ensuring no discolouration to the tank, even when stored outside.  The MDPE is available in natural with colour contrasted graduation scales, allowing the operator to easily view the liquid level.

Chemically resistant MDPE is compatible with a wide range of chemical reagents and is also supplied to food grade standards.  Please don't hesitate to get in touch if you wish to check the complicity of your reagents with MDPE.

We can supply our 50 Litre Chemical Dosing Tank in black for use with chemicals that have a low vapour pressure such as sodium hypochlorite or hydrogen peroxide and with a companion bund.

Our single piece construction includes the thread for the screw top lid.  This means that there are no fixings used in the construction of the tank, ensuring that it is both corrosion free and mechanically strong.  The screw top lid can be fixed to the tank tightly, containing the chemical inside.

We can supply the DT50 chemical dosing tank with modifications for process applications, completely unmodified with the companion BT50 bund, or as a stand alone 50 litre chemical dosing tank.

DT50 Specifications

  • Specifications

    Specifications

    50 Litre Dosing Tank

    Model No:- DT50

    Max. Operating Temperature:- 35°C

    Materials:- MDPE (Medium Density PolyEthylene)

    Standard Colours:- (U.V Stabilised) Black, Red, Blue, Green or Natural

    Accuracy:- ±2% of stated sizes

    Dimensions:- 425 Ø x 500 H (mm)

    Cap Size:- 190mm

    Opening Size:- 130mm

  • Features

    Features

    • 50 Litre storage capacity in MDPE with screw top lid with fully moulded integral thread.
    • Rotary Moulded in the UK using a one piece moulding process.
    • Designed specifically for use in water treatment, effluent treatment and process control applications. 
    • Food grade MDPE.
    • Split level top for mounting of equipment.
    • Graduated scale of contents in contrasting colour on natural tanks.
    • Available in Black, Natural, or in Red / Blue so the contents is easily recognised as an Acid / Alkali.
    • U.V stabilised natural MDPE or available in black for use with low vapour pressure chemicals.
    • Can be modified to your specifications before shipping.

 

DT100

100 Litre Dosing Tank

100 litre dosing tank model DT100

100 Litre Dosing Tank manufactured in food grade MDPE


100 Litre Dosing Tank DT100 Introduction

The DT100 is a dosing tank with a capacity of 100 litres, designed specifically for use in water treatment, effluent treatment or process applications, with dimensions of 495 x 700 H (mm).

The 100 Litre Dosing Tank is manufactured from food grade and U.V stabilised MDPE (Medium Density PolyEthylene), which is rotatory moulded in the UK, to give a single piece construction chemical dosing tank.

The DT100 provides a simple and cost effective way of storing up 100 litres of chemical which can then be transferred into a process using a dosing pump or other equipment as required.

The 100 Litre dosing tank has a graduated scale on the front of the tank, which is colour contrasted on our natural coloured tanks.  This allows the user to visually inspect the contents of the tank, at a glance.

The 100 Litre Dosing Tank is available in a range of colours, including: black for use with liquids with a low vapour pressure, such as Sodium Hypochlorite or Hydrogen Peroxide, as well as Red to denote a specific chemical or in natural U.V Stabalised MDPE.


Screw Top Lid

The DT100 Dosing Tank is moulded as a single piece construction, with the threaded section moulded at the point of manufacture.  This means that our 100 Litre Dosing Tank has no seams or welds.  The single piece construction increases the mechanical strength of the dosing tank and as there are no weak points in the tanks construction, it reduces the risk of the tank becoming compromised, during normal operation.

As the thread is integral to the construction of the tank, there are no screws holding the threaded section into place, which ensures a completely corrosion free storage environment.

Supplied complete with the tank is a black screw fitting lid with dimensions of 190mm Ø, to keep the contents of the 100 Litre Dosing Tank securely locked away, when not in use.  The aperture of the tank opening is 130mm Ø.


DT100 Equipment Mounting

The DT100 is manufactured with a raised flat shelf, which is designed so that equipment can be mounted on top of the tank.

Due to the robust construction of the tank and flat top, we are able to offer the DT100 fitted with monitoring sensors from our range including Industrial Mixers, dip pH, Redox, or Conductivity assemblies as well as Liquid Level Sensor Assemblies, to allow the automated switching of control equipment.

Where more than one item is mounted onto the tank, or where the equipment is heavy, we're able to fit a tank top strengthening plate model to the dosing tanks.


Modifications

As the 100 Litre Dosing Tank can be used as a 100 Litre process vessel, we can supply the DT100 complete with fittings or with other modifications to suit your application.

We can fit solenoid valves; actuated valves (manually, pneumatically or electrically actuated), as well as inlets, outlets and other general pipework and fittings, depending upon your requirements.


Bund Tank for DT100

The DT100 can be supplied complete with an associated bund tank, to ensure compliance with Health & Safety legislation and to provide containment, in the event of the tank becoming compromised.

The companion bund for the DT100 Dosing Tank is the BT100 Bund Tank, which allows the tank to be stood in the bund tank and for the top of the tank to be easily accessible.  The BT100 has a total capacity of < 110 Litres.


100 Litre Dosing Tank Features & Benefits

The 100 Litre Dosing Tank model DT100 is manufactured in the UK, using moulding techniques to give single piece construction, with no welds or seams, ensuring greater mechanical strength.

The MDPE is U.V. stabilised, ensuring no discolouration to the tank, even when stored outside.  The MDPE is available in natural, with colour contrasted graduation scales, allowing the operator to easily view the liquid level.

Chemically resistant MDPE is compatible with a wide range of chemical reagents and is also supplied to food grade standards.  Please don't hesitate to get in touch, if you wish to check the complicity of your reagents with MDPE.

We can supply our 100 Litre Chemical Dosing Tank in black for use with chemicals that have a low vapour pressure such as sodium hypochlorite or hydrogen peroxide and with a companion bund.

Our single piece construction includes the thread for the screw top lid.  This means that there are no fixings used in the construction of the tank, ensuring that it is both corrosion free and mechanically strong.  The screw top lid can be fixed to the tank tightly, containing the chemical inside.

We can supply the DT100 Chemical Dosing Tank with modifications for process applications, completely unmodified with the companion BT100 Bund, or as a stand alone 100 litre chemical dosing tank.

DT100 Specifications

  • Specifications

    Specifications

    100 Litre Dosing Tank

    Model No:- DT100

    Max. Operating Temperature:- 35°C

    Materials:- MDPE (Medium Density PolyEthylene)

    Standard Colours:- (U.V Stabilised) Black, Red, Blue, Green or Natural

    Accuracy:- ±2% of stated sizes

    Dimensions:- 495 W x 700 H (mm)

    Cap Size:- 190mm

    Opening Size:- 130mm

  • Features

    Features

    • 100 Litre storage capacity in MDPE with screw top lid with fully moulded integral thread.
    • Rotary Moulded in the UK using a one piece moulding process.
    • Designed specifically for use in water treatment, effluent treatment and process control applications. 
    • Food grade MDPE.
    • Split level top for mounting of equipment.
    • Graduated scale of contents in contrasting colour on natural tanks.
    • Available in Black, Natural, or in Red / Blue so the contents is easily recognised as an Acid / Alkali.
    • U.V stabilised natural MDPE or available in black for use with low vapour pressure chemicals.
    • Can be modified to your specifications before shipping.

 

DT200

200 Litre Dosing Tank

200 litre dosing tank model DT200

200 Litre Dosing Tank manufactured in food grade MDPE


200 Litre Dosing Tank DT200 Introduction

The DT200 is a dosing tank with a capacity of 200 litres, designed specifically for use in water treatment, effluent treatment or process applications, with dimensions of 635 Ø x 785 H (mm).

The 200 Litre Dosing Tank is manufactured from food grade and U.V stabilised MDPE (Medium Density PolyEthylene), which is rotatory moulded in the UK, to give a single piece construction chemical dosing tank.

The DT200 provides a simple and cost effective way of storing up 200 litres of chemical, which can then be transferred into a process using a Dosing Pump or other equipment as required.

The 200 Litre Dosing Tank has a graduated scale on the front of the tank, which is colour contrasted on our natural coloured tanks.  This allows the user to visually inspect the contents of the tank, at a glance.

The 200 Litre Dosing Tank is available in a range of colours including: black for use with liquids with a low vapour pressure, such as Sodium Hypochlorite or Hydrogen Peroxide, as well as Red to denote a specific chemical or in natural U.V Stabalised MDPE.


Screw Top Lid

The 200 Litre DT200 Dosing Tank is moulded as a single piece construction, with the threaded section moulded at the point of manufacture.  This means that our 200 Litre Dosing Tank has no seams or welds.  The single piece construction increases the mechanical strength of the dosing tank, and as there are no weak points in the tanks construction, it reduces the risk of the tank becoming compromised, during normal operation.

As the thread is integral to the construction of the tank, there are no screws holding the threaded section into place, which ensures a completely corrosion free storage environment.

Supplied complete with the tank is a black screw fitting lid with dimensions of 190mm Ø, to keep the contents of the 200 Litre Dosing Tank securely locked away, when not in use.  The aperture of the tank opening is 130mm Ø.


DT200 Equipment Mounting

The DT200 is manufactured with a raised flat shelf, designed so that equipment can be mounted on top of the tank.

Due to the robust construction of the tank and flat top, we are able to offer the DT200 fitted with monitoring sensors from our range including Industrial Mixers, dip pH, Redox, or Conductivity assemblies as well as Liquid Level Sensor Assemblies, to allow the automated switching of control equipment.

Where more than one item is mounted on to the tank, or where the equipment is heavy, we're able to fit a tank top strengthening plate model to the dosing tanks.


Modifications

As the 200 Litre Dosing Tank can be used as a 200 Litre process vessel.  We can supply the DT200 complete with fittings or with other modifications to suit your application.

We can fit solenoid valves, actuated valves (manually, pneumatically or electrically actuated), as well as inlets, outlets and other general pipework and fittings, depending upon your requirements.


Bund Tank for DT200

The DT200 can be supplied complete with an associated bund tank to ensure compliance with Health & Safety legislation and to provide containment, in the event of the tank becoming compromised.

The companion bund for the DT200 Dosing Tank is the BT200 Bund Tank, which allows the tank to be stood in the bund tank and for the top of the tank to be easily accessible.  The BT200 has a total capacity of < 220 Litres.


200 Litre Dosing Tank Features & Benefits

The 200 Litre Dosing Tank model DT200 is manufactured in the UK using moulding techniques to give a single piece construction, with no welds or seams, ensuring greater mechanical strength.

The MDPE is U.V. stabilised, ensuring no discolouration to the tank, even when stored outside.  The MDPE is available in natural with colour contrasted graduation scales, allowing the operator to easily view the liquid level.

Chemically resistant MDPE is compatible with a wide range of chemical reagents and is also supplied to food grade standards.  Please don't hesitate to get in touch, if you wish to check the complicity of your reagents with MDPE.

We can supply our 200 Litre Chemical Dosing Tank in black for use with chemicals that have a low vapour pressure such as sodium hypochlorite or hydrogen peroxide, and with a companion bund.

Our single piece construction includes the thread for the screw top lid.  This means that there are no fixings used in the construction of the tank, ensuring that it is both corrosion free and mechanically strong.  The screw top lid can be fixed to the tank tightly, containing the chemical inside.

We can supply the DT200 chemical Dosing Tank with modifications for process applications, completely unmodified with the companion BT200 Bund, or as a stand alone 200 litre chemical dosing tank.

DT200 Specifications

  • Specifications

    Specifications

    200 Litre Dosing Tank

    Model No:- DT200

    Max. Operating Temperature:- 35°C

    Materials:- MDPE (Medium Density PolyEthylene)

    Standard Colours:- (U.V Stabilised) Black, Red, Blue, Green or Natural

    Accuracy:- ±2% of stated sizes

    Dimensions:- 635 Ø x 785 H (mm)

    Cap Size:- 190mm

    Opening Size:- 130mm

  • Features

    Features

    • 200 Litre storage capacity in MDPE with screw top lid with fully moulded integral thread.
    • Rotary Moulded in the UK using a one piece moulding process.
    • Designed specifically for use in water treatment, effluent treatment and process control applications. 
    • Food grade MDPE.
    • Split level top for mounting of equipment.
    • Graduated scale of contents in contrasting colour on natural tanks.
    • Available in U.V stabilised Black, Natural, or in Red / Blue so the contents is easily recognised as an Acid / Alkali.
    • Black tanks designed for use with low vapour pressure chemicals such as sodium hypochlorite.
    • Can be modified to your specifications before shipping.

 

DT300

300 Litre Dosing Tank

300 litre dosing tank model DT300

300 Litre Dosing Tank manufactured in food grade MDPE


300 Litre Dosing Tank DT300 Introduction

The DT300 is a dosing tank with a capacity of 300 litres, designed specifically for use in water treatment, effluent treatment or process applications, with dimensions of 660 Ø x 1075 H (mm).

The 300 Litre Dosing Tank is manufactured from food grade and U.V stabilised MDPE (Medium Density PolyEthylene), which is rotatory moulded in the UK, to give a single piece construction chemical dosing tank.

The DT300 provides a simple and cost effective way of storing up 300 litres of chemical which can then be transferred into a process using a Dosing Pump or other equipment as required.

The 300 Litre Dosing Tank has a graduated scale on the front of the tank, which is colour contrasted on our natural coloured tanks.  This allows the user to visually inspect the contents of the tank, at a glance.

The 300 Litre Dosing Tank is available in a range of colours, including: black for use with liquids with a low vapour pressure, such as Sodium Hypochlorite or Hydrogen Peroxide, as well as Red or Blue to denote if the contents are acidic or alkaline, as well as in U.V Stabilised Natural MDPE.


Screw Top Lid

The DT300 Dosing Tank is moulded as a single piece construction, with the threaded section moulded at the point of manufacture.  This means that our 300 Litre Dosing Tank has no seams or welds.  The single piece construction increases the mechanical strength of the dosing tank and as there are no weak points in the tanks construction, it reduces the risk of the tank becoming compromised, during normal operation.

As the thread is integral to the construction of the tank, there are no screws holding the threaded section into place, which ensures a completely corrosion free storage environment.

Supplied complete with the tank is a black screw fitting lid with dimensions of 190mm Ø, to keep the contents of the 300 Litre Dosing Tank securely locked away, when not in use. The aperture of the tank opening is 130mm Ø.


DT300 Equipment Mounting

The DT300 is manufactured with a raised flat shelf, which is designed so that equipment can be mounted on top of the tank.

Due to the robust construction of the tank and flat top, we are able to offer the DT300 fitted with monitoring sensors from our range including: Industrial Mixers, dip pH, Redox, or Conductivity assemblies as well as Liquid Level Sensor Assemblies to allow the automated switching of control equipment.

Where more than one item is mounted on to the tank, or where the equipment is heavy, we're able to fit a tank top strengthening plate model to the dosing tanks.


Modifications

As the 300 Litre Dosing Tank can be used as a 300 litre process vessel.  We can supply the DT300 complete with fittings or with other modifications to suit your application.

We can fit solenoid valves; actuated valves (manually, pneumatically or electrically actuated), as well as inlets, outlets and other general pipework and fittings, depending upon your requirements.


Bund Tank for DT300

The DT300 can be supplied complete with an associated bund tank to ensure compliance with Health & Safety legislation and to provide containment in the event of the tank becoming compromised.

The companion bund for the DT300 Dosing Tank is the BT300 Bund Tank, which allows the tank to be stood in the bund tank and for the top of the tank to be easily accessible.  The BT300 has a total capacity of < 330 Litres.


300 Litre Dosing Tank Features & Benefits

The 300 Litre Dosing Tank model DT300 is manufactured in the UK using moulding techniques to give single piece construction, with no welds or seams, ensuring greater mechanical strength.

The MDPE is U.V. stabilised, ensuring no discolouration to the tank, even when stored outside.  The MDPE is available in natural with colour contrasted graduation scales, allowing the operator to easily view the liquid level.

The chemically resistant MDPE is compatible with a wide range of chemical reagents and is also supplied to food grade standards.  Please don't hesitate to get in touch, if you wish to check the complicity of your reagents with MDPE.

We can supply our 300 Litre Chemical Dosing Tank in black for use with chemicals that have a low vapour pressure such as sodium hypochlorite or hydrogen peroxide and with a companion bund.

For easy recognition of the tank contents, we can supply our DT300 coloured in either Natural, Black, Blue, Red, or Green as required.

Our single piece construction includes the thread for the screw top lid.  This means that there are no fixings used in the construction of the tank, ensuring that it is both corrosion free and mechanically strong.  The screw top lid can be fixed to the tank tightly, containing the chemical inside.

We can supply the DT300 Chemical Dosing Tank with modifications for process applications, completely unmodified with the companion BT300 bund, or as a stand alone 300 litre chemical dosing tank.

DT300 Specifications

  • Specifications

    Specifications

    300 Litre Dosing Tank

    Model No:- DT300

    Max. Operating Temperature:- 35°C

    Materials:- MDPE (Medium Density PolyEthylene)

    Standard Colours:- (U.V Stabilised) Black, Red, Blue, Green or Natural

    Accuracy:- ±2% of stated sizes

    Dimensions:- 660 Ø x 1075 H (mm)

    Cap Size:- 190mm

    Opening Size:- 130mm

  • Ordering Information

    Ordering Information

    • 300 Litre storage capacity in MDPE with screw top lid with fully moulded integral thread.
    • Rotary Moulded in the UK using a one piece moulding process.
    • Designed specifically for use in water treatment, effluent treatment and process control applications. 
    • Food grade MDPE.
    • Split level top for mounting of equipment.
    • Available in U.V stabilised Black, Natural, or in Red / Blue so the contents is easily recognised as an Acid / Alkali.
    • Black tanks designed for use with low vapour pressure chemicals such as sodium hypochlorite.
    • Graduated scale of contents in contrasting colour on natural tanks.
    • Can be modified to your specifications before shipping.

 

More Articles ...

Search