Automated Water & Effluent Ltd

High Speed Mixers
Geared Mixers

Many of our customers that measure and adjust the pH of their solutions also need to mix both the reagents being dosed and the waste water being dosed and corrected. From around 1985 we have manufactured a range of simple mixers:

Our mixers are manufactured in two types

  • High speed mixers
  • Where the propeller rotates at the speed of the motor

  • Geared mixers
  • Where the impeller is driven through a reduction gearbox.

    High speed mixers must always be installed in tanks which are always full of liquid. When the mixer is to be run as the propeller has a self-centering action when rotating at speed in the liquid.

    Both the geared mixers and high speed mixers are available with a plastic coated shaft and propeller - this offers greater chemical resistance when used with aggressive chemicals or stronger concentrations. Please advise the chemical type being used before placing an order.

    High Speed Mixers

    The TM range of high speed mixers are for securely mounting on the top of a tank or mixer bridge. The shaft coupling and propeller are all manufactured from 316 grade stainless steel the propeller is of the 3 bladed marine type. Our preference is for 415 volt 3 phase motors but single phase motors can be supplied on some models.

    The model numbers, engine horsepower, propeller diameter and tank volume suitability are listed below

    High Speed Mixers

    Part No.

    TM0

    TM0-SP

    TM1

    TM-1SP

    TM2

    TM3

    TM4

    HP

    0.25

    0.5

    0.5

    0.5

    0.75

    1.0

    2.0

    Prop Dia (mm)

    75

    75

    100

    100

    150

    175

    200

    Tank Vol (Litres)

    200

    200

    500

    500

    1250

    2000

    4000

    Model numbers designated with "SP" refer to a single phase 240 Volt motor. In addition to the listed models we are able to offer custom designed high speed mixers for larger tank volumes and different motor types, including 110V, EX D or Air Motors as requested


    Geared Mixers

    The GMW geared mixers are manufactured using a worm driven gearbox with a hollow shaft. The mixer shaft is precision machined to suit and fitted with a keyway. The impeller is a three bladed flat type, manufactured in 316 stainless steel. The mixer blades have a large surface area to ensure efficient mixing.

    The mixer model types are listed below

    High Speed Mixers

    Part No.

    GMW01

    GMW11

    GMW2

    GM21

    GM3

    GMW31

    GMW4

    GMW41

    Kw

    0.18

    0.37

    0.55

    0.75

    1.1

    1.5

    2.2

    3.0

    Speed (RPM)

    140

    280

    140

    280

    95

    190

    70

    140

    Prop Ø (mm)

    250

    250

    300

    300

    400

    400

    500

    500

    Motor Supply

    415v
    240v

    415v
    240v

    415v
    --

    415v
    --

    415v
    --

    415v
    --

    415v
    --

    415v
    --

    We are able to make up special geared mixers, with multiple blades, slow speed motors, Ex rated motors and air motors please contact our sales office with your precise requirements.

Geared Mixer and High Speed Mixer

TM2 High Speed Mixer with a stainless steel shaft and marine type propeller.

Geared Mixer and High Speed Mixer

GMW Geared Mixer with a stainless steel shaft and a triple bladed stainless steel flat type propeller.

Contact AWE sales on 01785 254 597 for more information on our High Speed Mixers and geared mixers or to purchase our products.